- ページ 4

モニター Dillenger KEY-DISP 26EのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dillenger KEY-DISP 26E 5 ページ。 Key-disp led

Operation continued

Using the push-assistance function

To use the push-assistance function, press and hold the (-) button. This will activate the

motor and the bike will go at a continuous speed of 6 km/h. The three power-assistance

level indicator lights will all flash while this function is in use. The push-assistance function

switches off as soon as you release the (-) button.

The push-assistance function may only be used when pushing the bike alongside you. There

is a danger of injury when the wheels of the bike do not make contact with the ground while

using the push-assistance function.

Switching the light on/off (optional)

If the lights of your bike are integrated in the system, you can use the display to turn them

on/off. To turn the lights on, press the (+) button for about two seconds until the lights turn

on. To turn them off, press the (+) button again until the lights turn off.

Connection layout