- ページ 5

計測機器 AEMC instruments 6550のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。AEMC instruments 6550 13 ページ。 Megohmmeter

Thank you for purchasing an AEMC
or Model 6555.
For the best results from your instrument and for your safety, you must read the
enclosed operating instructions carefully and comply with the precautions for
use. Only qualified and trained operators should use this product.

Symbols and Definitions

Signifies that the instrument is protected by double or reinforced insulation
CAUTION - Risk of Danger! Indicates a WARNING. Whenever this symbol
is present, the operator must refer to the user manual before operation
Indicates a risk of electric shock. The voltage at the parts marked with this
symbol may be dangerous
USB Socket
Indicates Important information to acknowledge
Ground Earth
This product complies with the Low Voltage & Electromagnetic Compatibility
European directives (73/23/CEE & 89/336/CEE)
The UKCA marking certifies that the product is compliant with the
requirements that apply in the United Kingdom, specifically regarding
Low-Voltage Safety, Electromagnetic Compatibility, and the Restriction of
Hazardous Substances
Chauvin Arnoux
approach in order to design this instrument. Analysis of the complete
lifecycle has enabled us to control and optimize the effects of the product
on the environment. In particular this instrument exceeds regulation
requirements with respect to recycling and reuse
In the European Union, this product is subject to a separate collection
system for recycling electrical and electronic components in accordance with
directive WEEE 2002/96/EC

Definition of Measurement Categories (CAT)

CAT IV corresponds to measurements performed at the primary electrical
supply (< 1000 V).
Example: primary overcurrent protection devices, ripple control units, and
meters.
CAT III corresponds to measurements performed in the building installation at the
distribution level.
Example: hardwired equipment in fixed installation and circuit breakers.
CAT II corresponds to measurements performed on circuits directly connected to
the electrical distribution system.
Example: measurements on household appliances and portable tools.
Megohmmeter Models 6550 & 6555 - Quick Start Guide
Instruments Megohmmeter Model 6550
®
and AEMC
Instruments have adopted an Eco-Design
®
®
5