- ページ 6
計測機器 AEMC instruments CA7027のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEMC instruments CA7027 20 ページ。 Fault mapper pro graphical tdr
AEMC instruments CA7027 にも： ユーザーマニュアル (20 ページ)
ページを印刷する
2.1
The Fault Mapper Pro
Reflectometer) designed for identifying and locating faults on power and
communication cables, given access to one end only.
The Fault Mapper Pro
and distance to cable faults to a range of 9 ft (3m) to 19,000 ft (6000m)
on virtually any type of cable. It injects a series of pulses into the cable
under test. The velocity at which the pulses travel is determined by the
type of cable, which is known as the velocity of propagation (Vp) of the
cable. The Velocity of Propagation (Vp) is adjustable between 1% and
99% enabling accurate calibration to the cable under test.
The Vp value is expressed as a percentage of the speed of light (e.g.
67% or ft/mtrs/micro-second), this value will vary according to the type
of cable under test. The Fault Mapper Pro
values between 1 and 99% (or the equivalent value in feet or meters per
micro-second).
Based on the selected Vp and the time taken for the pulses to travel
through the cable, a reflection profile of the cable under test is displayed.
An adjustable cursor assists in locating faults and termination.
The Fault Mapper Pro
is detectable with a standard tone tracer, for use in the tracing and
identification of cable pairs.
2.2
•
•
•
•
•
•
4
Find Quality Products Online at:
PRODUCT FEATURES
Description
®
is a hand-held graphical TDR (Time Domain
®
measures cable length and indicates the length
®
incorporates an oscillating tone tracer, which
Key Features:
Vp Setting
Hand-held graphical TDR (Time Domain Reflectometer)
Measures cable length and indicates distance to faults to a range of
19,000 ft (6000m)
Graphical LCD
Easy identification of short range faults
Emits an audible tone, used to trace and identify the type of fault
GlobalTestSupply
www.
CHAPTER 2
®
can accept user selectable
Fault Mapper Pro
.com
®
Model CA7027