- ページ 24

携帯電話 Motorola A780のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Motorola A780 48 ページ。 J2me
Motorola A780 にも：入門マニュアル (5 ページ)

Disassembly

Removing and Replacing the LCD

This product contains static-sensitive devices. Use anti-static handling procedures

to prevent electrostatic discharge (ESD) and component damage.

Remove the battery cover, battery, SIM card, stylus, rear housing and the

transceiver board assembly as described in the procedures

The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when

handling.

Carefully work the flat end of the disassembly tool under the LCD flex

connector and remove the connector from the transceiver board. See Figure 8.

LCD Display

Figure 8. Disconnecting the LCD Flex Connector from the Transceiver Board

To replace, Insert the LCD flex connector squarely into its mating connector

on the transceiver board and press firmly until it snaps into place. Fold the

LCD over onto the transceiver board.

Replace the transceiver board, rear housing, SIM card, stylus, battery, and

battery cover as described in the procedures.

September 20, 2004

Flex Connector

A780

6809488A90