- ページ 7

プリンターアクセサリー Epson TM-L90 seriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Epson TM-L90 series 12 ページ。 Attaching cover on the power switch
Epson TM-L90 series にも：パンフレット (1 ページ), パンフレット (2 ページ), 製品マニュアル (27 ページ), 仕様 (2 ページ), 仕様 (8 ページ), 情報マニュアル (5 ページ), 仕様 (4 ページ), ユーザーマニュアル (40 ページ), ユーザーマニュアル (17 ページ), ユーザーマニュアル (21 ページ), ユーザーマニュアル (21 ページ), 製造マニュアル (22 ページ), ここからスタート (2 ページ), ここからスタート (2 ページ), マニュアル (13 ページ), ユーザーマニュアル (36 ページ), 開発マニュアル (34 ページ), マニュアル (2 ページ)

How to connect an Epson wireless POS printer

If you are using a wireless router then you should verify that the printer is connected to the router.

Pinging the Printer

You can verify the printer is connected to the computer by pinging the printer from the computer.

Open up a command window and enter:

ping <IP_address>

where <IP_address> is the IP address of the printer

The printer should reply to ping requests. Repeated timeouts indicate that the printer is not connected. If the printer does

not reply verify the IP address of the printer and the Ping setting on the

Configuring the Adapter with TMNet

Running the TMNet configuration utility on the Computer

You can run the TMNet configuration utility on your computer to view or change the settings on the wireless card. This

utility will scan for the wireless printers on your network and allow you to make changes to the adapter's settings.

To obtain the TMNet configuration utility from

http://www.beaglehardware.com/howtowireless.html[3/4/2011 12:28:11 PM]

Turn the printer on

Log onto the router administration from a computer on the network.

Check the wireless device status

Verify that the printer is communicating with the router by finding the IP address or MAC address of the printer in

the wireless device connection list on the router. If the device is not listed see the troubleshooting steps below.

1. You may have to re-enable your wired LAN port to download the EpsonTMNetWinConfig utility.

2. Download and Install Epson's TMNetWinConfig available from

WILL be REQUIRED

3. You

4. If you do not have a log in, you will be required to register for this service (this is free and takes

Look for IP or MAC address of adapter on router

(i.e. 192.168.192.168).

Epson's

website:

to log in to access these drivers.

Wireless adapter

properties.