- ページ 2

ハンドヘルド Argox PA-20のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Argox PA-20 2 ページ。

Install or replace the main battery in the terminal
1. Slide the main battery compartment cover lock to the
FREE position and remove the cover
2. Load a Li-Polymer battery pack into the main battery
compartment in the direction shown in the figure
3. Attach the battery compartment cover to the
terminal and slide the main battery compartment
cover lock to the LOCK position.
Install or replace the main battery in the gun grip
1. Turn the screw
2. Open the cover
Be sure to turn the terminal off before you do this
Keypad and function button
1
2
3
4
6
5
7
Charging the Battery
Spare Battery
Charge LED
Red = Normal charge / Green = Full Charge
1. Scan key
5. Power key
2. Cursor key
6. ESC key
3. 10-key pad
7. Reset
4. Enter key
SFT key
Switches between the character input mode and the number
input mode [abc][ABC] lit on the LCD screen indicates the
character input mode. When [123] is lit, the terminal is in the
number input mode.
Function key
F1 (-): Inputs the minus (-) sign
F2 (SP): Inputs a space
F3 (DEL): Deletes a character
F4 (BL): Turns the key lights ON and OFF
F5 (
): Press Power Key first and press F5 next to
increases buzzer volume
F6 (
): Press Power Key first and press F6 next to
increases LCD backlight
P1: press Power Key first and press P1 next to decrease
Buzzer volume and program 1 (for user SDK define)
P2: press Power Key first and press P2 next to decrease
LCD backlight and program 2 (for user SDK define)
Press mobile computer
firmly into cradle
Single slot Serial / USB Cradle
49-PA201-001 Rev. A – Apr,2013
Charge LED