- ページ 13

オーブン diLUSSO OV607SSLのPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。diLUSSO OV607SSL 14 ページ。

8) REPLACING THE OVEN BULB

Once the oven has been electrically disconnected, unscrew the glass protection cap and the bulb, replacing it

with another one suitable for high temperature 300 C.

It should be fit below points:

Voltage: 220-240Vac

Reassemble the glass cap and reconnect the oven.

9) TELESCOPIC RACKS ASSEMBLY

To assemble the telescopic arms :

Version 1.1

Power: 15W

E14

Remove the two frames, lifting them away from spacers A

Choose which shelf to use with the telescopic arms. Pay

attention to the direction in which the telescopic arms is to be

extracted. Position joint B and the joint C on the frame.

Secure the two frames with the guide rails using the holes

provided on the oven walls. The holes for the left frame are

situated at hole F1, F2, and the right frame at hole D1, D2.

Finally fit the frames on spacers A.

Page 12

Dec 2016