- ページ 3
換気フード diLUSSO TH602MSLのPDF インストレーションマニュアル＆ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。diLUSSO TH602MSL 12 ページ。 Telescopic hood
ページを印刷するCongratulations on the purchase our cooker hood. Before installing and/or using the cooker hood
carefully read all the instruction.
IMPORTANT NOTES
The instructions for use apply to several versions of this appliance. Accordingly, you
may find descriptions of individual features that do not apply to your specific appliance.
INSTALLATION
The manufacturer will not be held liable for any damages resulting from incorrect or
improper installation.
The minimum safety distance between the cooker top and the extractor hood is 650
mm (some models can be installed at a lower height, please refer to the paragraphs
on working dimensions and installation).
Check that the mains voltage corresponds to that indicated on the rating plate fixed to
the inside of the hood.
For Class I appliances, check that the domestic power supply guarantees adequate
earthing.
Connect the extractor to the exhaust flue through a pipe of minimum diameter 125mm.
The route of the flue must be as short as possible.
Do not connect the extractor hood to exhaust ducts carrying combustion flumes
(boilers, fireplaces, etc.).
If the extractor is used in conjunction with non-electrical appliances (e.g. gas burning
appliances),a sufficient degree of air circulation must be guaranteed in the room in
order to prevent the backflow of exhaust gas. The kitchen must have good ventilation
to guarantee the entry of clean air. When the extractor hood is used in conjunction with
appliances supplied with energy other than electric, the negative pressure in the room
must not exceed 0,04 mbar to prevent fumes being drawn back into the room by the
extractor hood.
In the event of damage to the power cable, it must be replaced by the manufacturer or
by the technical service department, in order to prevent any risks.
If the instructions for installation for the gas hob specify a greater distance specified
above, this has to be taken into account. Regulations concerning the discharge of air
have to be fulfilled.
USE
The extractor hood has been designed exclusively for domestic use to eliminate
kitchen smells.
Never use the hood for purposes other than for which it has been designed.
Never leave high naked flames under the hood when it is in operation.
Adjust the flame intensity to direct it onto the bottom of the pan only, making sure that
it does not engulf the sides.
Deep fat fryers must be continuously monitored during use: overheated oil can burst
into flames.
Do not have a naked flame under the extractor hood due to risk of fire.
This appliance is not intended for use by persons (including children) with reduce
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they are being supervised or given instructions concerning the use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
"CAUTION: Accessible parts may become hot when used with cooking appliances".
MAINTENANCE
Switch off or unplug the appliance from the mains supply before carrying out any
maintenance work.
Clean and/or replace the Filters after the specified time period (Fire hazard).
Clean the hood using a damp cloth and a neutral liquid detergent.
The symbol
on the packaging indicates that this product may not be treated as
household waste. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences on the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.
3