- ページ 26

双方向ラジオ Motorola ASTRO SRX 2200 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola ASTRO SRX 2200 Series 45 ページ。 Digital portable radios
Motorola ASTRO SRX 2200 Series にも：クイック・リファレンス・マニュアル (48 ページ), クイック・リファレンス・カード (2 ページ), クイック・リファレンス・カード (2 ページ)

6. Dress the cable so that it does not obstruct any vehicle controls nor touch

any hot or moving parts of the engine.

7. Connect power cable plug P2 to console jack J2.

8. If the optional external speaker is being installed, connect speaker cable

plug P1 to console jack J1. Attach strain-relief S-hook (not provided) to

the console; crimp the S-hook with a pair of pliers.

9. Connect external antenna cable plug P3 to console jack J3. If your model

has a mini-UHF type connector, use Mini-UHF Connector Tool (part

number REX4584) to tighten the connector.

10. Connect microphone cable plug P4 to console jack J4. Attach a strain-

relief

S-hook (not provided) to the console; crimp the S-hook with a pair of

pliers (Required when a hand microphone is installed.)

11. Make certain that no radio is installed in the console, and then replace the

two cable wire 5-amp fuses.

Optional External Speaker Installation

10-16 x 5/8"

Self-Tapping

Screw

0.157" (0.399cm)

Diameter

Figure 9: External Speaker Installation Detail

Dashboard

Firewall

Console Floor

Dashboard

Firewall

Trunnion Bracket

10-16 x 5/8"

Self-Tapping

Screw