- ページ 35

双方向ラジオ Motorola ASTRO SRX 2200 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola ASTRO SRX 2200 Series 45 ページ。 Digital portable radios
Motorola ASTRO SRX 2200 Series にも：クイック・リファレンス・マニュアル (48 ページ), クイック・リファレンス・カード (2 ページ), クイック・リファレンス・カード (2 ページ)

In some installations, the ignition switch is bypassed so that the

APX VA charges the radio battery with the ignition switch turned off.

If this describes your installation, be careful not to discharge the

vehicle battery by allowing the APX VA to operate for extended

periods of time with a radio loaded and the vehicle ignition switch

turned off.

Note: Turning the vehicle's ignition switch off WILL NOT turn the radio off. To

avoid long-term radio battery run-down, do not leave the radio on (or off)

in the APX VA with the vehicle's ignition off (Even when radio is off, the

system still draws current from the car battery.)

Loading the Radio Into the APX VA

Make sure that all the labels on the radio and battery that are not

shipped with the standard product are removed. These labels, if

not removed, may peel off and interfere with proper operation or

damage the APX VA.

1. Remove the universal connector cover or any accessories attached to the

radio universal connector (see your radio's User Guide).

2. Referring to Figure 11 and Figure 12, orient the radio with battery

attached-speaker or keypad facing upward or outward. Then, slide the

radio into the APX VA's radio pocket as far as it can go until the radio is

fully inserted in the pocket.

Figure 11: Radio with Keypad Orientation and Speaker Orientation

Pocket

Warning

Label

(respectively)