- ページ 18

双方向ラジオ Motorola CLP1010のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola CLP1010 48 ページ。 Clp series two-way radio
Motorola CLP1010 にも：クイック・リファレンス (2 ページ)

ページを印刷する

68012000044-ED

Chapter 2 : Getting Started

CLP1010 Single-Channel

Models

Chan-

LED

Color

nel

Status

2.10

Monitoring Channels

Procedure:

1 To activate the monitor selection mode, press the Menu button and navigate to Monitor

Selection.

If the monitor is off, you hear a voice prompt to activate the monitor mode by pressing either + or

– button.

2 Press either + or – button to activate or deactivate the monitor mode.

When the monitor mode is on, you hear static if no activity is present or audio if channel activity

is present.

3 To engage the monitor mode, enable monitor through the menu and let the menu time out.

4 To exit the Monitor mode, press the PTT button.

2.11

Scan

You can scan up to four channels on CLP1040 models and six channels on CLP1060 models.

When the radio detects activity, it stops scanning and locks in on the active channel. This allows you to

listen and talk to the person transmitting without changing channels.

2.11.1

Scanning Radio Channels

Procedure:

1 To navigate to Scan mode, press the Menu button.

If the scan is off, you hear a voice prompt to activate Scan by pressing either + or – button.

2 To activate scan, press either + or – button.

When scan is on, you hear a voice prompt to deactivate Scan by pressing the + or – button.

3 To deactivate scan, press either + or – button.

2.12

Dynamic Talkaround Scan

This feature maximizes communication coverage for an on-site repeater enabled on two way radio

systems.

CLP1040 Multi-Channel

Models

Chan-

LED

Color

nel

Status

CLP1060 Multi-Channel

Models

Chan-

LED

Color

nel

Status

White