- ページ 18
双方向ラジオ Motorola CLP1060のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola CLP1060 48 ページ。
ページを印刷する
68012000044-ED
Chapter 2 : Getting Started
CLP1010 Single-Channel
Models
Chan-
LED
Color
nel
Status
2.10
Monitoring Channels
Procedure:
1 To activate the monitor selection mode, press the Menu button and navigate to Monitor
Selection.
If the monitor is off, you hear a voice prompt to activate the monitor mode by pressing either + or
– button.
2 Press either + or – button to activate or deactivate the monitor mode.
When the monitor mode is on, you hear static if no activity is present or audio if channel activity
is present.
3 To engage the monitor mode, enable monitor through the menu and let the menu time out.
4 To exit the Monitor mode, press the PTT button.
2.11
Scan
You can scan up to four channels on CLP1040 models and six channels on CLP1060 models.
When the radio detects activity, it stops scanning and locks in on the active channel. This allows you to
listen and talk to the person transmitting without changing channels.
2.11.1
Scanning Radio Channels
Procedure:
1 To navigate to Scan mode, press the Menu button.
If the scan is off, you hear a voice prompt to activate Scan by pressing either + or – button.
2 To activate scan, press either + or – button.
When scan is on, you hear a voice prompt to deactivate Scan by pressing the + or – button.
3 To deactivate scan, press either + or – button.
2.12
Dynamic Talkaround Scan
This feature maximizes communication coverage for an on-site repeater enabled on two way radio
systems.
18
CLP1040 Multi-Channel
Models
Chan-
LED
Color
nel
Status
CLP1060 Multi-Channel
Models
Chan-
LED
Color
nel
Status
6
White