- ページ 29

双方向ラジオ Motorola clp446のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola clp446 46 ページ。 Clp series two-way radio
Motorola clp446 にも：ユーザー・インストラクション (9 ページ), クイック・リファレンス (35 ページ)

ページを印刷する

RADIO CLONING

CLONING RADIO SETTINGS

You can copy the CLP Series radio settings from

one radio (the source) to a second radio using the

CLP Series Single Unit Charger (SUC) Kit P/N

IXPN4028 and CLP Series Cloning Cable Kit P/N

HKKN4026 (optional accessory) or CLP Series

Multi-Unit Charger (MUC) Kit P/N IXPN4029

(optional accessory).

A multi-channel radio can be cloned to a single-

channel radio BUT only the first channel is cloned.

The Multi-Unit Charger (MUC) does not have to be

plugged in for cloning, but both radios require

charged batteries.

Note:

The enhanced CLP software also uses the

LED to indicate "pass" or "fail" status during

cloning. Green LED during cloning indicates

"pass" status and red LED during cloning

indicates "fail" status.

CLONING INSTRUCTIONS

Cloning Radios using the CLP Series

Cloning Cable Kit P/N HKKN4026

(optional accessory)

Cloning the Radio through a Single Unit

Charger

Source Radio: Radio to be cloned

Target Radio: Radio to which the configuration of

the "Source Radio" is to be copied.

Before beginning the cloning process, make

sure you have:

• A fully charged battery on each one of the radios

• Two CLP Series Single Unit Charger (SUC) Kits

• Both radios are turned OFF

Unplug any cables (power supply or USB

cables) from the Single Unit Chargers.

English