- ページ 25

双方向ラジオ Motorola CP 140のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola CP 140 26 ページ。 Uhf2 (438-470mhz)
Motorola CP 140 にも：基本マニュアル (16 ページ), 基本マニュアル (16 ページ), 基本マニュアル (18 ページ), 詳細サービスマニュアル (28 ページ), Cps/チューナー・インストレーション・マニュアル (6 ページ), サービス情報 (46 ページ), サービス情報 (46 ページ)

USER SETTINGS

You can enable/disable some of your radio features

using the programmable buttons pre-programmed

by your dealer.

Your radio can be programmed to increase the

volume of the alarm tones when a radio call is not

answered.

Press the preprogrammed Escalert button to toggle

between On and Off.

Use this feature to filter out (unwanted) calls and/or

background noise. However, tightening squelch

could cause calls from remote locations to be

filtered out as well. In this case, normal squelch may

be more desirable.

Press the preprogrammed Squelch button to toggle

between tight and normal squelch.

Each channel in your radio has a predefined

transmit power level that can be changed.

High power allows you to reach a radio that is

•

farther away.

•

Low power to conserve the battery.

To set the power level, press the preprogrammed

Power Level button to toggle between low and high

power.

Use this feature to enable or disable an option

board.

Press the preprogrammed Option Board button to

toggle the option board on or off.

English