- ページ 8
双方向ラジオ Motorola CP185 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola CP185 Series 40 ページ。
Motorola CP185 Series にも： ユーザーマニュアル (42 ページ), 一般仕様 (2 ページ)
ページを印刷する
1. Channel Selector Knob
Used to select channels in normal radio operation mode.
2. On/Off and Volume Knob
Turn the ON/OFF/Volume Control knob clockwise to turn
the radio ON.
Turn the ON/OFF/Volume Control knob counterclockwise
to turn the radio OFF.
Turn this knob clockwise to increase the volume.
Turn this knob counterclockwise to decrease the volume.
3. LED Indicator
Indicates radio transmit, receive, scan and monitor status.
Refer to "LED Colors" on page 3 for more information.
4. Speaker
Receives audio messages through the speaker.
5. Microphone
Speak into the microphone when sending messages.
6. Liquid Crystal Display (LCD)
An 8 character single line display with up to 9 radio status
icons. Refer to "LCD Display and Icons" on page 4 for
more details.
2
English
7. Push-to-Talk (PTT) Button
Press and speak to microphone to send message.
Release and listen to receive messages.
Note:
If a channel is programmed with the Busy Channel
Lockout feature, the user can only transmit if the
channel is not in receiving mode.
8. Side Programmable Buttons
Refer to "Programmable Buttons" on page 5 for more
details.
9. Accessory Connector
2.5 mm audio in port and 3.5 mm audio out port are used
to connect compatible accessories to the radio.
10. Programming Port
2.5 mm audio in lower port used by dealer to program the
radio.
11. Left/Right Button
Used to navigate menu, sub-menu or parameter
selections in Front Panel Feature and Button
Configuration Mode.
12. Front Programmable Buttons
Refer to "Programmable Buttons" on page 5 for more
.
details
English