- ページ 13

双方向ラジオ Motorola GP240のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola GP240 46 ページ。 Professional radio, power distribution and controller
Motorola GP240 にも：ユーザーマニュアル (46 ページ), サービス情報 (32 ページ), サービス情報 (30 ページ), サービス情報 (30 ページ)

ページを印刷する

UG_240_280_EN.fm Page 9 Wednesday, August 14, 2002 10:30 AM

Symbol

Programming/Viewing Mode

Indicates when the radio is in the programming

or viewing mode;

ON = IN VIEWING MODE

BLINKING = IN PROGRAMMING MODE.

Battery Level Indicator

Shows the remaining charge in your battery,

based on how many bars are displayed.

Flashing, indicates flat battery.

Alert Tone Indications

Your radio generates a number of audible tones to

indicate radio operating conditions:

•

Low Battery – A low-battery condition is indi-

cated by a high-pitched, "chirp-chirp" when the

PTT switch is released following a transmission.

•

Successful Power-Up – A short, medium-pitched

tone when the radio is first turned on indicates

that the radio has passed its power-up self test

and is ready for use.

•

Unsuccessful Power-Up – A short, low-pitched

tone when the radio is first turned on indicates

Downloaded from

www.Manualslib.com

Name and Description

manuals search engine

•

Transmit on Receive-Only Mode – If you press

the PTT switch while tuned to a "receive-only"

mode, you will hear a continuous, low-pitched

alert tone, indicating that no transmission is

possible on this mode. This tone will continue

until the PTT switch is released.

•

Transmit Inhibit on Busy Mode – If you press the

PTT switch while the mode is busy, you will hear

a continuous, low-pitched alert tone, indicating

that no transmission is possible on this mode.

This tone will continue until the PTT switch is

released.

•

Transmit Inhibit on Flat Battery – If you press the

PTT while the battery is flat, you will hear a con-

tinuous, low pitched alert tone, indicating that

transmission is impossible.

•

Invalid Mode – A continuous, low-pitched tone is

heard when an invalid or unprogrammed

operation is attempted on the radio.

•

Valid (Good) Key Press – A short, medium-

pitched tone when a keypad key is pressed

indicates that the key press was accepted.

•

Invalid (Bad) Key Press – A short, low-pitched

tone when a keypad key is pressed indicates