- ページ 27

双方向ラジオ Motorola GP280のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola GP280 46 ページ。 Professional radio, power distribution and controller
Motorola GP280 にも：ユーザーマニュアル (46 ページ), サービス情報 (32 ページ), サービス情報 (30 ページ), サービス情報 (30 ページ)

ページを印刷する

UG_240_280_EN.fm Page 23 Wednesday, August 14, 2002 10:30 AM

2. The green LED and call received status

annunciator, F

being received. You have 20 seconds to

answer the call before the radio automatically

returns to the home display.

3. Press the call response button or the call

button.

4. The display shows the

incoming caller's ID

number, and the call

received annunciator will

turn off.

5. After viewing the caller's ID number, you can

decide to either talk privately (go to next step),

or not answer the call by pressing the call

response or call button to return to the home

display.

6. If you decide to answer the call, press the PTT

switch.

7. The caller's ID number

remains displayed for the

duration of the call.

Downloaded from

www.Manualslib.com

will blink indicating that a call is

ID: 722588

manuals search engine

9. The radio will return to

the home display.

Note: If you press the PTT switch before you press

the call response button, the response will be

transmitted to everyone in the talkgroup (a

dispatch mode operation).

• After answering a Private Call, the caller's ID

number is stored in your radio as the "last ID

number received".

• If your radio is configured for Private Call II,

upon receiving a Private Conversation call, two

alert tones sounds, followed by the received

voice.

Making a Private Call

(GP280 radios only)

There are four phases in making a private call, namely

• initiating a private call,

• entering the desired radio ID number,

• sending the radio ID number, and

• having the conversation and hanging-up.

Initiating a Private Call

PLANT POLICE