- ページ 4

デスクトップ Epson Endeavor 486CのPDF 製品サポート速報をオンラインで閲覧またはダウンロードできます。Epson Endeavor 486C 21 ページ。 Product information guide
Epson Endeavor 486C にも：製品情報マニュアル (9 ページ)

ページを印刷する

The Discovery CD 16 Multimedia system comes with 5 3.5" diskettes. Three

diskettes are for the sound card, one is for a 'Text-to-Speech' application, and

one disk is for the CD-ROM device driver and utilities.

The Sound Blaster files are copied to the hard disk drive by an INSTALL.EXE

utility on disk 1. The utility will prompt the installer for the second and third

disks. The routine will modify the AUTOEXEC.BAT and CONFIG.SYS files.

Upon completion, the user is prompted to re-boot the system so that the

changes can take effect. The utility will also modify the Windows SYSTEM.INI

file. When you run Windows, a SB routine will modify and add the Sound

Blaster utilities to a new Program group. The routine will re-start Windows so

that the changes can take effect. The sound card can be tested in a DOS

environment by running TESTSB16. This file is located in the sound blaster

sub-directory SB16.

The utility will test the existence and functionality of the following areas:

I/O Address: IRQ:

220H

The bold face values above are typical for the default configuration. The Sound

card passed all of the tests listed below:

The CD-ROM files are copied to the hard disk drive by an INSTALL.EXE utility

on the disk 1. The routine will modify the AUTOEXEC.BAT and CONFIG.SYS

files. Upon completion, the user is prompted to re-boot the system so that the

changes can take effect. To install CD-ROM into Windows, the user must

manually add the 'QuickCD' to the Sound Blaster 16 program group. Open the

'Sound Blaster 16' group, and from Program Manager File select New. Program

Item should have the bullet marked. Select the OK button. From the Program

Item Properties box select the Browse button. Scroll to the C:\SB16\PLAYCD

sub-directory. Select QCD.EXE as the file name and click the OK button. This

bring you back to the Program Item Properties box. For a Description enter

QCD. Click on the Change Icon button and choose a CD symbol for the icon

button. Click on the OK button and the QuickCD icon is present in the Sound

Blaster 16 program group. Insert an analog/music CD into player. If you click

on the CD icon without a disc installed you will get the following warning:

'Ensure that you have a CD audio ready in your drive and CD MCI driver

installed in your system. The system is ready for use.

DMA channels:

1,5

2-operator FM Music

4-Operator FM Music

8-Bit Sound

16-Bit Sound

PSB No: S-0171

Page: 4 of 5

DSP Version:

4.05