- ページ 3

デスクトップ Epson Endeavor WGのPDF 製品サポート速報をオンラインで閲覧またはダウンロードできます。Epson Endeavor WG 17 ページ。 Using with ms windows 3.x stylus 400/800+/color printer driver
Epson Endeavor WG にも：製品サポート速報 (15 ページ), 製品サポート速報 (3 ページ), マニュアル (9 ページ)

ページを印刷する

EPSON AMERICA, INC.

Product Support Bulletin

Subject: Progression/Progression 4 OS/2 2.0 Display Driver

Date: 10/08/93

Page(s): 1 of 2

This bulletin announces the availability of Wingine-enhanced 32-bit display drivers

for the Epson Progression and Progression 4 computers running IBM's OS/2 2.0.

The 32-bit Service Pack from IBM must be installed before installing the new display

drivers. Also, the current system configuration must be VGA or SVGA.

These drivers can be downloaded from the Epson Bulletin Board System (BBS) that

can be reached at (310) 782-4531. They are located in one self-extracting file

(WING_OS2.EXE) in file library DRIVERS. Once downloaded, extract the files to a

high-density diskette (1.44MB) by entering the command:

WING_OS2 A: or WING_OS2 B:

depending on which disk drive is being used. The diskette must have the volume

label OS2 DRVS.

To install a driver, place the Display Drivers diskette into drive A:. Open an OS/2

session, either full-screen or window, and enter the following command:

A:INSTALL A: C:

INSTALL.CMD on the driver diskette copies files to the hard drive and starts the

OS/2 Display Driver Install utility DSPINSTL, which prompts the user.

When the Display Driver Install main panel appears, the Primary Display should

indicate Video Graphics Array. If so, click OK and proceed. If VGA is not selected,

select Primary Display and click OK.

Highlight the Driver/Resolution desired and click OK.

When the Source Directory panel appears, choose the floppy drive ( A: ) which

contains the Driver diskette and click on Install.

When the main panel appears again, click on Cancel.

The new driver has been installed. You must shutdown and then re-boot your

system for the changes to take effect.

For any future driver changes, INSTALL.CMD on the driver diskette is not required.

PSB No: S-0166

Originator: MWT

EPSON