- ページ 6

ベビーモニター Motorola LUX85CONNECTのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Motorola LUX85CONNECT 12 ページ。

5. Installation of Cot mount

A cot mount with cable management is included which mounts directly to most cots to allow

better viewing. Assemble and install the cot mount using the following steps.

• Join the 4 poles and the support base together as the diagram shown. (Fig. 1a , 1b)

Fig. 1a

Note:

Each pole is connected with power cord inside, manage with care the power cords when

removing the poles from the box and during installation.

• The Top clamp is delivered by default for vertical clamping on the

top rail of the cot, to clamp horizontally on the slates of the crib,

please unfasten and remove the tiny knob completely from the

Top Clamp assembly (Fig.2a), remove the Top Clamp from the

assembly and re-orient the Top Clamp with the long open end

pointing at left hand side (Fig. 2b), then reinsert into the assembly,

fasten the tiny knob back to the assembly until the Top Clamp is

securely locked.

• Fasten the top clamp either vertically on the upper rail or the slats

horizontally. (Fig 2c, 2d)

Fig 2a

Fig. 1b

Fig 2b

Fig 2c

Fig 2d