- ページ 12

ベビーモニター Motorola MBP20のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola MBP20 23 ページ。 Motorola
Motorola MBP20 にも: ユーザーマニュアル (23 ページ), クイックマニュアル (2 ページ)

Motorola MBP20 ユーザーマニュアル
3.4.1

Adjust talk back volume

The baby unit has 5 volume levels from Level 1 to Level 5.
>
<
Press
or
on the baby unit to increase or decrease
the volume respectively.
NOTE
If a lullaby is playing, it will stop during Talk Back, but will
restart from the beginning when the Talk Back ends.
3.5

Temperature

The baby unit constantly monitors the temperature in your
baby's room and alerts you if it gets lower than 14ºC (or
57ºF), by emitting a warning beep and showing the alert
message "Too cold!" on the parent unit screen, or if it gets
higher than 39ºC (or 102ºF), it will show "Too hot!".
Although this is for reference only, and there may be a
small difference between the baby monitor reading and the
actual temperature, please check your baby immediately if
such an alert message is triggered.
Note
The current temperature at the baby unit is shown on the
parent unit status bar whenever it is displayed.
12
3.6

Lullaby

There are 3 lullabies available to play for your baby, either
repeating one melody or repeating through all three
melodies.
2
1. Press
on the baby unit to select the lullaby and
start playing.
2. During playback, press
lullabies.
OR
8
Press
on the baby unit to start playing the selected
lullaby.
3. During playback, press
3.7
Monitoring management for multi-
parent system
The system allows pairing up to two parent units to a baby
unit. However, only one parent unit can receive video
image at a time. You can switch the video feed between
these two parent units.
The first powered up parent unit will connect to the baby
unit automatically, and the next powered up parent unit will
turn up on screen
ANOTHER PU IS VIDEO MONITORING!
seconds and then goes blank. Press once the
off the screen.
2
to step between different
9
to stop playing.
for around 30
6
to turn
USING YOUR BABY MONITOR