- ページ 20

ベビーモニター Motorola MBP25/4のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola MBP25/4 30 ページ。 Digital video baby monitor
Motorola MBP25/4 にも: クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (6 ページ), ユーザーマニュアル (27 ページ), クイック・スタート・マニュアル (8 ページ)

Motorola MBP25/4 ユーザーマニュアル

7. Help

Display
No Display
• Try recharging or replacing the Battery Pack.
• Reset the Units. Disconnect the Battery Pack of the Parent Unit and unplug
both the Units' electrical power, then plug them back in.
• Is the Unit turned on?
Press and hold the ON/OFF button
• Is the correct Camera selected?
Change the Camera number, if necessary.
• Is the video display turned on?
Press the VIDEO ON/OFF button
• When operating using batteries only, the Display will go blank after
4 minutes to save power. The unit is still active and will give you audio alerts.
You can reactivate the screen by pressing any button.
Registration
If the Baby Unit has lost its link with the Parent Unit
• Try recharging or replacing the Battery Pack.
• If the Baby Unit is too far away it may be out of range, move the Baby Unit
closer to the Parent Unit.
• Reset the Units by disconnecting them from the battery and electrical power.
Wait about 15 seconds before reconnecting. Allow up to one minute for the
Baby Unit and the Parent Unit to synchronize.
• See Step 2.4 Registration (Pairing), if there is a need to re-register the units.
20
P
on the Parent Unit to turn it ON.
V
to turn it ON.
Help