- ページ 18

ベビーモニター Motorola MBP26/3のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola MBP26/3 27 ページ。 Digital video baby monitor
Motorola MBP26/3 にも：クイック・スタート・マニュアル (2 ページ), ユーザーマニュアル (27 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ)

7. Help

Display

No display

• Try recharging or replacing the battery pack.

• Reset the units. Disconnect the battery pack of the parent unit and

unplug both the units' electrical power, then plug them back in.

• Is the unit turned on?

Press and hold the ON/OFF button

ON.

• Is the correct camera selected?

Change the camera number, if necessary.

• Is the video display turned on?

Press the VIDEO ON/OFF button

• When operating using batteries only, the Display will go blank after 4

minutes to save power. The unit is still active and will give you audio

alerts. You can reactivate the screen by pressing any button.

Registration

If the Baby Unit has lost its link with the Parent Unit

• Try recharging or replacing the battery pack.

• If the Baby Unit is too far away it may be going out of range, so move

the Baby Unit closer to the Parent Unit.

• Reset the units by disconnecting them from the battery and electrical

power. Wait about 15 seconds before reconnecting. Allow up to one

minute for the Baby Unit and the Parent Unit to synchronise

• See 2.4 Registration (Pairing), if there is a need to re-register the

units.

on the parent unit to turn it

to turn it on.

Help