QUICK START GUIDE

For a full explanation of all features and instructions, please refer to the User's Guide.

1. Setting up your Digital Baby Monitor

A. Connecting power supply for the Baby Unit

C. Fastening the cover for the Parent Unit

WARNING:

STRANGULATION HAZARD - Keep the Unit and adapter cord more than 3 feet from the crib and out of reach.

NEVER place camera or cords within the crib.

Never use extension cords with AC Adapters. Only use the AC Adapters provided.

B. Installing the battery pack for the Parent Unit

Connect the small plug of

the power adapter to the

Black

Baby Unit and the other end

to the electrical outlet.

Red

Only use the enclosed

adapter (6V DC / 500mA).

D. Connecting power supply for the Parent Unit

Small cross head or

Flat end screwdriver.

Insert the wire tab of the

rechargeable battery pack

into the contact slot as

shown above and fit the

battery pack into the

compartment.

Connect the small plug of

the power adapter to the

Parent Unit and the other

end to the electrical outlet.

Only use the enclosed

adapter (6V DC / 500mA).