- ページ 10

ベビーモニター Motorola MBP41S-2のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola MBP41S-2 29 ページ。 Digital video monitor
Motorola MBP41S-2 にも：ユーザーマニュアル (27 ページ), クイック・スタート・マニュアル (2 ページ)

ページを印刷する

2. Place the battery compartment cover over the battery, making sure that

the battery wires are carefully pushed down and the cover fits properly.

3. Gently tighten the screw in a clockwise direction using a small cross head

or flat end screwdriver.

2.3

Parent Unit Power Supply

IMPORTANT

Installing the rechargeable battery pack and charging it fully before use is

recommended. This will allow the unit to operate on battery in the event of a

power failure.

1. Connect the small plug of the power adapter to the Parent Unit and the

other end to the electrical outlet. Only use the supplied power adapter (5V

DC / 600mA) with the micro-USB style plug.

2. Press and hold the

the Parent Unit.

3. Once the Baby and Parent Units are switched on, the display on the Parent

Unit will show the video captured by the Baby Unit.

4. If there is no connection or you are out of range, the video display will go

off and the unit will beep every 5 seconds. Move the Parent Unit closer to

the Baby Unit until the link is re-established.

Micro USB Socket

Micro USB Plug

POWER ON/OFF button for 1 second to turn ON

Getting Started