- ページ 4
デスクトップ Epson Equity LT-386SXのPDF 製品サポート速報をオンラインで閲覧またはダウンロードできます。Epson Equity LT-386SX 15 ページ。 Product support bulletin(s)
Epson Equity LT-386SX にも： 製品サポート速報 (4 ページ)
ページを印刷する
EPSON AMERICA, INC.
Equity LT-286e and Third Party Memory Boards
Subject:
Date: 5/09/90
Page: 1 of 1
The purpose of this bulletin is to provide information on additional memory
expansion after the Epson 1mb memory bd has been installed.
Because of the 2/3 size of the AT compatible expansion slot in the LT286e, most
full length memory cards will not fit.
However, a 2/3 size 16 bit memory card from RAMFLEX has been tested and found
to be compatible.
The RAMFLEX card comes populated with 2mb of embedded DRAM. An installation
program is provided and setup is quite simple.
The RAMFLEX card must be installed as extended memory and for expanded
memory an EMS package like TURBO EMS from LANTANA must be used.
From the
> prompt, run "INSTALL" from the RAMFLEX diskette.
A:
The steps are self explanatory. Set the start address at 2432 if the system is already
configured at 2mb. When the system re-boots it will prompt you with a "MEMORY
. Run setup and the memory field will auto update. System re - boots
SIZE ERROR"
and configures to 4mb.
LANTANA's TURBO EMS was used to emulate 2mb of expanded memory under
LIM 4.0.
The supplier is:
INFORMATION
Product Support Bulletin
COMPUTER ELEKTRONIK INFOSYS of America, Inc.
512 - A Hemadon Parkway
Herndon, VA 22070
TEL
(703) 435 - 3800
(800) 322 - 3464
PSB No: S-011
Originator: DS