- ページ 8

ベビーモニター Motorola PIP1510 CONNECTのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola PIP1510 CONNECT 29 ページ。 5.0" wi-fi motorized video baby monitor
Motorola PIP1510 CONNECT にも：ユーザーマニュアル (30 ページ)

ページを印刷する

Connecting the baby (camera) unit

You will need to carry out this process for the single or multi baby (camera)

units.

Plug the DC plug of the power adapter into the power socket on the rear of

the baby (camera) unit and plug the other end of the AC adapter into the

wall socket.

2. The baby unit turns on and the power indicator lights up in blue and blinks

in red after 30 seconds if the parent unit has not been powered up.

Connecting and charging the parent unit

A rechargeable battery is already pre-installed inside the parent unit. When

fully charged, you can move the parent unit without losing the link and picture

from the baby (camera) unit. When charging the battery for the first time,

charge for at least 16 hours continuously

Important

Warning! Use only the approved rechargeable Lithium-ion battery supplied

with your PIP1510 CONNECT, PIP1510-2 CONNECT, PIP1510-3 CONNECT or

PIP1510-4 CONNECT.

Plug the DC plug of the power adapter into the power socket on the side

of the parent unit and plug the other end of the AC adapter into the wall

socket.

2. Switch on the AC power and the parent unit will turn on.

Press and hold

Getting started