- ページ 8

コードレス電話 Motorola C1001のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola C1001 44 ページ。 C12 series

Connecting the handset and charger

(for multi-pack only)

If you have purchased a multiple pack, you will need to carry out this process

for all the handsets and chargers.

1. Plug the power adaptor into the socket marked

the charger and plug the other end into the mains power wall socket.

2. Remove the battery cover from the back of the handset and insert the

2 x AAA NiMH rechargeable batteries supplied. Please note the '+' and

'-' markings inside the battery compartment and insert in the correct

direction.

3. Slide the battery cover back into place.

4. If you are charging the batteries for the first time, place the handset on

the charger to charge for at least 24 hours continuously.

5. When the handset is fully charged,

display. The display will show

indicate that it is registered to the base.

IMPORTANT

Warning! Use only the approved rechargeable Ni-MH battery cells (2 x AAA

Ni-MH 450mA rechargeable batteries) supplied with your C12.

BATTERY LOW WARNING

icon flashes on the display and you hear a warning beep every

minute during a call, you will need to recharge the handset before you can

use it again.

When charging,

BATTERY PERFORMANCE

In ideal conditions, fully charged batteries should give up to 10 hours talk

time or up to 200 hours standby time on a single charge.

Getting started

HANDSET

icon will scroll on the display.

on the underside of

icon will appear steady on the

and handset number (e.g. 2) to