- ページ 8

コードレス電話 Motorola C1001LAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola C1001LA 42 ページ。

Connecting the handset and charger (for multi-pack only)

If you have purchased a multiple pack, you will need to carry out this process for all the

handsets and chargers.

1. Plug the power adaptor into the socket marked

and plug the other end into the mains power wall socket.

2. Remove the battery cover from the back of the handset and insert the 2 x AAA NiMH

rechargeable batteries supplied. Please note the '+' and '-' markings inside the battery

compartment and insert in the correct direction.

3. Slide the battery cover back into place.

4. If you are charging the batteries for the first time, place the handset on the charger to

charge for at least 24 hours continuously.

5. When the handset is fully charged,

display will show

to the base.

IMPORTANT

Warning! Use only the approved rechargeable Ni-MH battery cells (2 x AAA Ni-MH 300mA

rechargeable batteries) supplied with your C1LA.

BATTERY LOW WARNING

icon flashes on the display and you hear a warning beep every minute during a call,

you will need to recharge the handset before you can use it again.

When charging,

BATTERY PERFORMANCE

In ideal conditions, fully charged batteries should give up to 10 hours talk time or up to 200

hours standby time on a single charge.

Note that new batteries do not reach their full capacity until they have been put to normal

use for several days.

To keep your batteries in the best condition, leave the handset off the base for a few hours

at a time.

Running the batteries right down at least once a week will help them last as long as

HANDSET

and handset number (e.g. 2) to indicate that it is registered

icon will scroll on the display.

on the underside of the charger

icon will appear steady on the display. The