コードレス電話 Motorola C1013LXのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola C1013LX 2 ページ。 Digital cordless telephone with
answering machine
Motorola C1013LX にも： マニュアル (2 ページ)
ページを印刷するDigital Cordless Telephone with
Answering Machine
Manufactured, distributed or sold by Binatone Technologies Ltd., official licensee
for this product. MOTOROLA and the Stylized M Logo are trademarks or registered
trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other
trademarks are the property of their respective owners. © 2014 Motorola Mobility LLC.
Models: C1011LX, C1012LX, C1013LX and C1014LX
All rights reserved.
Version 18(EN-US)
2. Getting to know your phone
IMPORTANT
Warning! Use only the approved rechargeable Ni-MH battery pack (AAA 2.4v 300mAh
Overview of your base
Ni-MH rechargeable battery) supplied with your C101xLX.
E
BATTERY LOW WARNING
LED
If
icon flashes on the display and you hear a warning beep every 2 minutes
Indicates when the answering
f
machine is on or o and
during a call, you will need to recharge the handset before you can resume use.
when you have messages.
When charging,
icon will scroll on the display.
Status Action
On
answering machine on
BATTERY PERFORMANCE
O
answering machine o
In ideal conditions, a fully charged battery should give up to 10 hours of talk time or up
Flashes New message (s)
to 200 hours standby time on a single charge.
1
Volume Up
Adjust playback volume.
Note that new batteries do not reach their full capacity until it has been put to normal
use for several days.
Ans On / O
Switches the answering
To keep your batteries in the best condition, leave the handset off the base for a few
machine on / o .
hours at a time.
Running the batteries down at least one time per week will help them last as long as
Delete
Press to delete recorded
possible.
messages during playback .
The charge capacity of the rechargeable battery will reduce with time as it wears out,
Volume Down
giving the handset less talk / standby time. Eventually it will need to be replaced.
Adjust playback volume.
After charging your handset for the first time, subsequent charging time is about 6–8
hours a day. The battery and handset may become warm during charging. This is
normal.
1
All talk and standby times are approximate and depend on features selected and
usage pattern.
Date and time
If you have subscribed to a Caller ID Service and the Auto Clock is set to on, the date
and time will set automatically for all handsets when you receive your first call.
If you do not have a Caller ID service, you can set the date and time manually, see
section "5.3. Date and Time".
Your C101xLX is now ready for use.
3.5
Intercom
3.6
Hands-free
To talk to the caller without holding the handset or for other people in the room to
3.5.1
Make an internal call
If more than one handset is registered to the base, internal calls can be made
listen to the conversation over the loudspeaker simply use the hands-free function.
between two handsets.
icon flashes and the display shows the handset number you
3.6.1
Make a hands-free call
*
are calling.
e
1.
Dial the number and then press
1.
If only 2 handsets are registered to the base, press
and the other handset
2.
Press
*
h
rings automatically.
t
3.6.2
Answer a call hands-free
d
2.
If more than 2 handsets are registered to the base press
and scroll
to the
Press
to answer the call in hands-free.
h
handset that is to be called and press
.
NOTE
3.5.2
Receive an internal call
Press
to switch the call between the earpiece and the loudspeaker.
When you receive an internal call,
icon flashes and the handset number that is calling
t
During a hands-free call, press
you is displayed.
3.7
Redial
1.
Press
to make an internal call.
The last 10 entries dialed are stored in the redial list.
3.5.3
Transfer a call
3.7.1
View or dial an entry
You can transfer an external call to another handset registered to the base.
r
*
1.
Press
During an external call:
t
u
2.
Scroll
1.
If only 2 handsets are registered to the base, press and hold
and the other
*
3.
Press
handset rings automatically.
m
3.7.2
Copy a Redial list number to the phonebook
2.
If more than 2 handsets are registered to the base press and hold
and scroll
r
e
d
to the handset that is to be called and press
.
1.
Press
3.
When the other handset answers, press
to complete the transfer.
u
2.
Scroll
m
NOTE
3.
Press
m
Your external call resumes automatically after 1 minute if there is no answer.
4.
Press
3.5.4
3-way conference call
5.
Enter the name and press
You can hold a 3-way conference call between 2 internal callers and 1 external caller.
6.
Edit the number if necessary, then press
*
During a call with an external caller:
3.7.3
Delete an entry
r
1.
If only 2 handsets are registered to the base, press and hold
and the other
*
1.
Press
handset rings automatically.
u
2.
Scroll
2.
If more than 2 handsets are registered to the base press and hold
m
and scroll
d
d
to the handset that is to join the call and press
.
3.
Scroll
m
m
3.
When the other handset answers, press
to connect all three callers to begin
4.
Press
e
the conference call.
4.
Press
to end the call.
Welcome...
to your new Motorola C101xLX Digital Cordless Telephone
with Answering machine!
•
Answering machine up to 12 minutes digital recording time.
•
All handsets are completely cordless and easy to locate with paging system.
•
Bright backlit display.
•
Speakerphone for hands-free conversations.
•
50 Name and Number phonebook.
•
Caller ID shows you who's calling and shows the details of the last 20 callers in
a Calls list.
1
•
Redial up to 10 of the last numbers called.
•
Register up to 4 handsets to a single base.
•
Make internal calls and transfer external calls between handsets.
•
Choose from 10 different ringtones.
Please note that this equipment is not designed for making emergency telephone
calls when the power fails. Alternative arrangements should be made for access
to emergency services.
Need help?
If you have any problems setting up or your using your C101xLX Digital Cordless
Telephone with Answering Machine, please contact Customer Service at
1-888-331-3383. Alternatively, you may find the answer in the 'Help' section at the
back of this guide.
1
You must subscribe to your network provider's Caller ID service for this feature to
work. A subscription fee may apply.
Please note that this equipment is not designed for making emergency telephone
calls when power fails. Alternative arrangements should be made for access to
emergency services.
Overview of your handset
Phonebook / Scroll Up /
Volume down
Display
Stop
Open the phonebook.
Stops message playback.
Scroll up through lists and
menus.
Page
Increase the earpiece volume.
In standby mode, press to
ring the handset(s).
Press and hold to enter
Menu / OK
registration mode when
Enter the main menu.
registering handsets.
Select the option
displayed on screen.
Skip forward
Con rm menu option.
Press to skip forward through
your answering machine
messages.
Skip back
Talk / Flash
Press to skip backward
Make or answer a call.
through your answering
Use flash (F) functions.
machine messages.
Play
* / Intercom
Play recorded messages.
Press and hold to make
an internal call.
Dial a *.
Hands-free
Activate and deactivate
hands-free during a call.
IMPORTANT
Hands-free activation can
suddenly increase the
volume in the earpiece to
a very high level. Make
sure the handset is not
too close to your ear.
Redial
In standby mode, press
to open the redial list.
Microphone
Handset display
3.7.4
Delete the entire Redial list
r
1.
Press
to open the Redial list.
m
d
2.
Press
. Scroll
to
h
m
3.
Press
to confirm or
.
3.8
Lock / unlock the keypad
to end the call.
You can lock the keypad so that it cannot be operated accidentally while carrying it around.
NOTE
When the keypad is locked, you can still answer incoming calls and operate the
0
handset normally during a call. When the call ends, the keypad lock resumes in place.
1.
Press and hold
.
u
d
or
to adjust the volume.
Keys locked is displayed.
2.
To unlock the keypad, press and hold
3.9
Paging / Find handset
p
Paging is a useful way to find lost handsets.
to open the Redial list.
p
1.
Press
on the base. All handsets ring.
e
d
or
to the entry you want.
2.
Press
again to cancel the paging call or press any key on the handset to stop
to dial the displayed entry or press
to return to standby.
the paging call.
4. Phonebook
to open the Redial list.
The C101xLX handset phonebook can store up to 50 names and numbers.
d
or
to the entry you want.
Names can be up to 14 characters long and numbers up to 24 digits.
. The display shows
Save
number.
4.1
Store a name and number
m
again. The display shows
Enter
name.
m
1.
Press
.
Phonebook
m
. The number is displayed.
m
2.
Press
.
New Entry
is displayed.
m
to save.
3.
Press
.
Enter Name
4.
Enter a name and press
m
to open the Redial list.
e
m
5.
Enter a number. Press
d
or
to the entry you want. Press
.
m
b
6.
Press
to return to standby.
to
Delete
and press
. The display shows Confirm?.
ENTERING NAMES
to confirm or
to cancel.
Use the keypad letters to enter names, e.g. to store TOM:
8
Press
once to enter T.
6
Press
6
three times to enter O.
Press
once to enter M.
This User Guide provides you with all the information you need to
get the most from your phone.
Before you make your first call you will need to set up your phone.
Follow the simple instructions in 'Getting Started', on the next
few pages.
IMPORTANT
Only use the telephone line cord and power adapter supplied.
Got everything?
•
C101xLX base & cordless handset
•
1 x rechargeable Ni-MH battery pack
•
Power adapter for the base
•
Telephone line cord
•
User Guide
•
Quick Start Guide
If you have purchased a C101xLX multiple pack you will also have the following
items:
•
Cordless handset & charger
•
Rechargeable Ni-MH battery pack
•
Power adapter for the charger
•
Telephone line cord
Handset display
Call list / Scroll Down /
Display icons
Volume down
Press to enter the Calls list.
Earpiece
Scroll down through lists
and settings.
During a call, press to
decrease earpiece volume.
When the phone is ringing,
press to decrease the
handset ringer volume.
Clear / Back
Delete characters on screen
when entering names and
numbers.
Go back to previous menu
Indicates signal strength.
level is displayed on the
Flashes when the handset is not registered to the base or if you are out of range.
screen.
Indicates a missed call.
End call / Switch handset
Steady when making an outgoing call.
on/o
Flashes to indicate an incoming or internal call.
End a call.
Indicates an incoming call when viewing the calls list.
When in a menu, go back
to standby mode.
Indicates an outgoing call when viewing the calls list.
Press and hold to switch
handset o (when in
Hands-free is on.
standby) or on.
Handset ringer is off.
Pause / # / Change case
Press and hold to enter a
Answering machine is on.
pause (P) when pre-dialling
or storing numbers.
Indicates new voicemail messages received .
Dial a #.
When entering letters /
Off when there is no voicemail messages.
editing, press and hold to
pq
Indicates you can scroll through a list or adjust the volume in talk mode.
change the case from Abc
f
to abc or ABC mode.
Indicates more text after the displayed information.
Mute
u
When viewing the Calls
Mute / unmute the
List press to change the
H
Battery is fully charged.
microphone during a
CID format.
call.
l
Battery is partially charged.
E
Battery is running low.
Flashes when battery is almost fully discharged.
b
WRITING TIPS
Press
to delete the last character or digit.
b
0
u
d
Delete
all. The display shows Confirm?.
Press
or
to move between characters.
to cancel.
Press
to insert a space.
4.2
View or dial an entry
u
1.
Press
.
u
d
2.
Scroll
or
to the entry you want.
OR
Enter the first letter of the name to search alphabetically.
The first name that starts with this letter or the nearest letter in the alphabet will be
0
t
e
u
d
displayed. Scroll
or
to the entry you want.
again.
3.
Press
to dial or
to return to standby.
4.3
Edit a name and number
m
1.
Press
twice. The display shows View.
m
d
2.
Scroll
to
Edit
and press
.
u
d
3.
Scroll
m
or
to the entry you want to edit, or search alphabetically and press
b
. The existing name is displayed.
4.
Press
m
to delete the name if required, then enter the new name and press
b
. The existing number is displayed.
5.
Press
m
to delete the number if required, then enter the new number and
press
to save.
4.4
Delete an entry
is displayed.
m
1.
Press
twice. The display shows View.
m
d
2.
Scroll
to
Delete
and press
.
is displayed.
m
m
u
d
3.
Scroll
or
to the entry you want to delete, or search alphabetically and press
b
.
. The display shows Confirm?.
m
to save.
4.
Press
to confirm or
to cancel.
4.5
Delete all entries
m
1.
Press
twice. The display shows View.
m
d
2.
Scroll
to
Delete all
and press
.
b
3.
The display shows Confirm?.
m
4.
Press
to confirm or
to cancel.
1. Getting started
IMPORTANT
Do not place your C101xLX in the bathroom or other humid areas.
Location
You need to place your C101xLX base within 6 feet of an electrical outlet and a
telephone wall socket to provide the power to supply the device and to connect to
telephone service.
Make sure it is at least 3 feet away from other electrical appliances to avoid interference.
Your C101xLX works by sending radio signals between the handset and base. The
strength of the signal depends on where you place the base. Putting it as high as
possible ensures the best signal.
HANDSET RANGE
The unit has a range of up to 650 feet outdoors when there is a clear line of sight
between the base and handset. Any obstruction between the base and handset will
reduce the range significantly. With the base indoors and the handset either indoors or
outdoors, the range will normally be up to 100 feet. Thick concrete and stone walls can
severely affect the range.
SIGNAL STRENGTH
The
icon on your handset indicates that you are within range of the base. When out of
range of the base, the
icon disappears. If you are on a call, you will hear a warning beep.
If you are on a call, the line will hang up if the handset moves out of range of the base.
Move back within range. The handset will automatically re-connect to the base.
Setting up
IMPORTANT
Use only the power adapter and telephone line cord supplied with the product.
Connecting the base
1.
Plug the telephone line cord into the socket marked
on the rear of the base.
2.
Plug the power adapter into the socket marked
on the rear of the base and
plug the other end into the electrical outlet.
1
This feature is dependent on your Network Service provider supporting the service. A
subscription fee may be applicable.
Navigating the menus
Each menu has a list of options, which can be seen in detail on the menu map on the
below list.
When the handset is switched on and in standby mode:
m
1.
Press
to open the main menu.
u
d
2.
Then use
or
buttons to scroll through the available options.
m
b
e
3.
Press
to select an option. To return to the previous menu level,
press
. To exit the menu and return to standby, press
.
NOTE
If you do not press a button on the handset for 30 seconds the display will automatically
return to standby. It will also return to standby when the handset is placed on the base
or charger.
Menu map
Phonebook
Battery tone
Reset
View
Phone name
Answ. Machine
Add new
Date & time
Play
Edit
Language
Delete all
Delete
1
Services
Announcement
Delete all
1
Call list type
Voice answer
Phone setup
Area code
Ring delay
Sounds
Flash time
Remote access
Ring volume
Dial mode
Voice Language
Ring tones
Auto clock
Key tone
Register
1
Docking tone
Unregister
1
Only available when an phonebook entry is already stored.
5. Personal settings
5.1
Sounds
5.1.1
Ring volume
You can adjust the ringer volume and set different volume levels. Choose from 5
volume levels or Off.
m
d
1.
Press
, scroll
to
Phone setup.
m
2.
Press
. The display shows Sounds.
m
3.
Press
. The display shows
Ring
volume.
m
b
u
d
4.
Press
, scroll
or
to select the volume (1 -5 or OFF) .
m
5.
Press
to confirm or
to return to the previous menu.
5.1.2
Ringer tones
You can set different ringer tones for your internal and external calls. Choose from 10
different ringer tones.
NOTE
You will hear a sample ring as you scroll to each ring tone.
m
d
1.
Press
, scroll
to
Phone setup.
m
2.
Press
. The display shows Sounds.
m
d
3.
Press
. Scroll
to
Ring
tones.
m
b
u
d
4.
Press
, scroll
or
to select the tone (1 -10) .
m
5.
Press
to confirm or
to return to the previous menu.
5.1.3
Key tones on/off
When you press a button on the handset keypad, you will hear a beep. You can switch
these beeps on or off.
m
d
1.
Press
, scroll
to
Phone setup.
m
2.
Press
. The display shows Sounds.
m
d
3.
Press
. Scroll
to
Key
tone.
m
m
u
d
4.
Press
,
or
to select
On
or
Off
and press
to confirm.
5.1.4
Docking tone on /off
When you replace the handset in the base you will hear a double beep. You can switch
this beep on or off.
m
d
1.
Press
, scroll
to
Phone setup.
m
2.
Press
. The display shows Sounds.
Charging the handset
3.
If you are charging the battery for the first time, place the handset on the base to
charge for at least 24 hours continuously.
4.
When the handset is fully charged,
icon will appear steady on the display.
Plug the other end of the telephone line cord (make sure that one end is already
plugged into the base) into the telephone wall socket.
Connecting the handset and charger
(for multi-pack only)
If you have purchased a multiple pack, you will need to carry out this process for all the
handsets and chargers.
1.
Plug the power adapter into the socket marked
on the rear of the charger
and plug the other end into an electrical outlet.
2.
If you are charging the battery for the first time, place the handset on the charger
to charge for at least 24 hours continuously.
3.
When the handset is fully charged,
icon will appear steady on the display.
The display will show
Handset
and handset number (e.g. 2) to indicate that it is
registered to the base.
3. Using the phone
NOTE
Your handset will automatically time the duration of all external calls. The call timer will
display after the first 10 seconds of your call. When the call ends, the total duration of
your talk time is shown for 3 seconds.
e
3.1
Switch the handset on / off
Press and hold
to switch the handset on or off.
3.2
Calls
t
3.2.1
Make a call
1.
Press
.
2.
Dialing a telephone number.
b
3.2.2
Pre-dial
1.
Use the keypad to dial a number, if you make a mistake press
to delete the
t
last digit.
2.
Press
to dial.
e
3.2.3
End a call
Press
, or place the handset back on the base or charger.
3.2.4
Answer a call
t
When you receive an external call, the phone rings and
icon flashes on the display.
1.
Press
to answer the call.
3.3
Adjust the earpiece volume
u
d
During a call, press
or
to increase or decrease the volume. There are 5 levels
to choose from.
3.4
Mute
You can mute your handset so that you can talk to someone nearby without your caller
M
hearing.
1.
During a call, press
. The display shows
Mute on
and your caller cannot hear
M
you.
2.
Press
again to resume your call.
m
d
3.
Press
. Scroll
to
Docking
tone.
m
m
u
d
4.
Press
,
or
to select
On
or
Off
and press
to confirm.
5.1.5
Battery tones
When the battery is running low you will hear a warning beep. You can switch this
beep on or off.
m
d
1.
Press
, scroll
to
Phone setup.
m
2.
Press
. The display shows Sounds.
m
d
3.
Press
. Scroll
to
Battery
tone.
m
m
u
d
4.
Press
,
or
to select
On
or
Off
and press
to confirm.
5.2
Handset name
Personalize your handset, with a name or location for example Peter or Bedroom.
Maximum 12 characters.
m
d
1.
Press
, scroll
to
Phone setup.
m
2.
Press
. The display shows Sounds.
m
d
3.
Scroll
to
Phone name
and press
.
m
b
4.
Enter the new handset name and press
to confirm.
Delete the current name by pressing
.
5.3
Date & time
m
d
1.
Press
, scroll
to
Phone setup.
m
2.
Press
. The display shows Sounds.
m
d
3.
Scroll
to
Date & time
and press
.
4.
Enter the date using the keypad (e.g. 08--12--14 for 12th of August 2014) and
m
press
to confirm.
5.
Enter the time using the 12 hour format hh:mm, e.g. 02:45 for 2:45.
m
u
d
6.
Scroll
or
to select
am
or
pm
and press
to confirm.
5.4
Language
m
d
1.
Press
, scroll
to
Phone setup.
m
2.
Press
. The display shows Sounds.
m
d
3.
Scroll
to
Language
and press
.
m
u
d
4.
Scroll
or
to select the required language and press
to confirm.