- ページ 7

コードレス電話 Motorola D1002のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola D1002 45 ページ。 Digital cordless phone
Motorola D1002 にも：ユーザーマニュアル (26 ページ), ユーザーマニュアル (26 ページ), ユーザーマニュアル (50 ページ)

ページを印刷する

the other end into the mains power wall socket and switch

the power on.

Connecting the handset and charger (Multi-

pack only)

If you have purchased a multiple pack, this process will need

to be carried out for all handsets and chargers:

1. Plug the mains power cable with the red connector into

the socket marked

2. Insert the 2 x AAA NiMH batteries supplied into the

handset. Then slide the compartment cover into place.

Getting started

on the underside of the charger.

3. Place the handset on the charger to charge for at least

24 hours. When the handset is fully charged the

icon will indicate that it is fully charged.

4. When the handset is fully charged after 24 hours, plug

the telephone line cord from the large base into the

telephone wall socket.

IMPORTANT

Warning! Use only the approved rechargeable Ni-MH battery

cells (2 x AAA Ni-MH 550mA rechargeable batteries)

supplied with your D1000. Please do not use alkaline or non

rechargeable batteries. It may cause permanent damage to

the product and void the warranty.

BATTERY LOW WARNING

If the

icon flashes in the display, you will need to

recharge the handset before you can use it again.

During charging, the

icon will scroll in the display.

Once fully charged scrolling will stop.

BATTERY PERFORMANCE

In ideal conditions, fully charged batteries should give up to

10 hours talk time or up to 150 hours standby* time on a

single charge.

*All talk and standby times are approximate and depend on

features selected and usage pattern.