- ページ 13

コードレス電話 Motorola D1010 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola D1010 Series 35 ページ。 D1000 / d1010 series
Motorola D1010 Series にも：クイック・スタート・マニュアル (2 ページ), 仕様書 (4 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ)

ページを印刷する

End a call

1. Press

After you hang up, the duration the phone is off-hook is displayed for 5

seconds.

NOTE

If auto hang-up is on (see page 21) simply replace the handset on the

base to end the call. The default setting is ON.

Switch handset on/off

1. Press and hold

until the handset switches off.

2. Press and hold

again to switch the handset back on.

Call a second external number

Put an external caller on hold to make a second external call. You can

then switch between both callers or hold a 3-way conference call.

1. During your call, press

2. Press

CALLING R

- Display shows

3. Enter the second number.

4. When your second caller answers, press

menu:

CONFERENCE

– press

to initiate a 3-way with an external caller

and internal caller.

SWITCH CALLS

– press

to switch between the two callers.

5. Press

to hang up.

Intercom

This feature is only available when there are at least 2 registered

handsets. It allows you to make internal calls, transfer external calls from

one handset to another and use the conference option.

Call another handset

1. Press

• If you have two handsets, the other handset is called automatically.

Using the phone

INIT 2ND CALL

. Scroll

to open the option

• If more than two handsets are registered to the base, their numbers

2345*

are displayed, e.g.

. Enter the number of the handset you want to

call or press

to ring all handsets.

2. Press

to hang up.

NOTE

If the handset does not belong to D1000/1010 range, this function may

not be available.

Transfer an external call to another handset

1. During an external call, press

- Your caller is put on hold.

2. Enter the number of the handset you want to call or press

all handsets.

- If there are only two handsets, the other handset is called

automatically.

3. When the other handset answers, announce the caller then press

to transfer the call. If the other handset does not answer, press

to talk to your caller again.

Three-party conference call

1. During an external call, press

- Your caller is put on hold.

2. Enter the number of the handset you want to call or press

all handsets.

- If there are only two handsets, the other handset is called

automatically.

3. When the other handset answers, announce the call then press and

hold

to connect both calls. If the other handset does not

answer, press

to talk to your caller again.

4. Press

to hang up.

Voicemail

If you have subscribed to your network's voicemail service (if available),

your D1011 displays

when you have a new message. Depending on

your country and network services, the voicemail number may be pre-

stored in your handset for one touch dialling using the

button.

to ring