- ページ 6

コードレス電話 Motorola D1110 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola D1110 Series 43 ページ。 D1100 series digital cordless phones
Motorola D1110 Series にも：クイック・スタート・マニュアル (2 ページ), 仕様書 (4 ページ)

ページを印刷する

1. Setting up

1. Getting started

WARNING

Do not place your D1111 in the bathroom or other humid areas.

Location

You need to place your D1111 base within 2 metres of the mains power

socket and telephone socket so that the cables will reach.

Make sure it is at least 1 metre away from other electrical appliances to

avoid interference. Your D1111 works by sending radio signals between

the handset and base. The strength of the signal depends on where you

place the base. Putting it as high as possible ensures the best signal.

To wall mount your D1111 base, see "Wall mounting" on page 41.

HANDSET RANGE

The D1111 has a range of 300 metres outdoors when there is a clear line

of sight between the base and handset. Any obstruction between the

base and handset will reduce the range significantly. With the base

indoors and handset either indoors or outdoors, the range will normally

be up to 50 metres. Thick stone walls can severely affect the range.

SIGNAL STRENGTH

The

icon on your handset indicates when you are in range. When out

of range of the base, the screen shows

During call, if the handset goes out of range the handset will emit out out

of range warning tone.

If you are on a call, the line will hang up if the handset moves out of range

of the base. Move back within in range. The handset will automatically re-

connect to the base.

Setting up

IMPORTANT

The base station must be plugged into the mains power at all times. Do

not connect the telephone line cord into the wall socket until the handset

is fully charged. Only use the power and telephone cables supplied with

the product.

Searching...

and the

flashes.

WHICH POWER ADAPTOR?

The power adaptor with a clear connector is for the base unit and the

power adaptor with a red colour connector is for the charger unit.

Connecting up the large base

Plug the power adapter with clear connector into the socket marked

on the underside of the base and plug the other end into the mains power

wall socket and switch the power on.

Connecting the handset and charger (Multi-pack only)

If you have purchased a multiple pack, this process will need to be carried

out for all handsets and chargers:

1. Plug the power adapter with red connector into the socket marked

on the underside of the charger.

Getting started