- ページ 5

コードレス電話 Motorola D202のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola D202 28 ページ。 D200 series digital cordless phone
Motorola D202 にも：仕様書 (2 ページ)

ページを印刷する

Allegro_CID.book Page 3 Tuesday, January 15, 2008 3:07 PM

1. Setting up

Follow these simple steps to prepare your phone ready for

use.

Finding a location

Make sure your phone is:

• Within 1.8 metres of a power and phone socket so that the

cords will reach.

• At least 1 metre away from other electrical appliances, to

avoid interference.

• Not located in humid or damp conditions, e.g. in a

bathroom.

Connecting your phone

Connect the base power supply into the socket on the back of

the base. Plug the other end into the mains power socket.

WARNING

Use only the power supply that came with your phone. Only

use the power supply TEN PAO G060040D25, 6V DC (center

plus mark) 400mA 2.4VA .

Using another power supply could seriously damage your

phone and invalidate your warranty.

Do not connect the telephone line cord until your handset is

fully charged. This will prevent the risk of the phone being

answered before the batteries are charged. Answering the

phone before the batteries are fully charged may prevent them

from reaching their optimum capacity.

Preparing the handsets

Installing and charging the handset batteries

1. On the handset:

Remove the battery compartment cover.

Press down on the semi-circle indent and slide the cover off.

Connect the supplied batteries with the correct polarity.

Slide the battery cover back until it clicks securely into place.

2. To charge the battery, place the handset on the base. The

charging light in the base illuminates. When the handset is

fully charged all the bars of the battery symbol

filled. If the charging light does not come on, reposition the

handset in the base, ensuring that the charging points

contact.

You must charge each handset for 16-20 hours before use.

WARNING

Under no circumstances should non-rechargeable batteries be

used. Only use the supplied batteries or you will invalidate

your guarantee and may damage the telephone.

Battery low warning

If the empty battery symbol

is displayed on the handset,

or if you hear the low battery tone during a call, you will need

to recharge your handset.

NOTE

If you set the "BATTERY LOW" tone to off, the low battery tone will

not sound.

We recommend that you place the handset back on the base

between use to ensure that it is always fully charged.

Battery Performance

The handset may become warm during charging, but this is

normal.

The handset will give 10 hours talk time and 170 hours standby

time on a full charge.

New NiMH batteries do not reach its full capacity until they has

been fully charged.

will be