- ページ 7

コードレス電話 Motorola E2 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Motorola E2 Series 44 ページ。

Getting started

Location

Important

Do not place your E2 in the bathroom or other humid areas.

Place your E2 base within reach of the mains power and telephone wall socket.

The socket-outlet should be installed near the equipment and should be

easily accessible.

Make sure that it is at least 1 metre away from other electrical appliances to avoid

interference. Your E2 works by sending radio signals between the handset and

base. The strength of the signal depends on where you place the base. Placing it

as high as possible ensures the best signal.

Handset range

The unit has a range of up to 300 metres outdoors when there is a clear line of

sight between the base and handset. Any obstruction between the base and

handset will reduce the range significantly. With the base indoors and the handset

either indoors or outdoors, the range will normally be up to 50 metres. Thick

concrete and stone walls can severely affect the range.

Signal strength

The

icon on your handset indicates that you are within range of the base. When

out of range of the base, the

icon flashes. If you are on a call, you will hear a

warning beep.

The line will hang up if the handset moves out of range of the base. Move closer to

the base. The handset will automatically reconnect to the base.

Setting up

Important

The base station must be plugged into the mains power at all times. Do not

connect the telephone line cord into the wall socket until the handset is fully

charged. Use only the power adaptor and telephone line cord supplied with

the product.

Getting started