- ページ 29
コードレス電話 Motorola E398 seriesのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Motorola E398 series 44 ページ。 Tri-band wireless telephone
Motorola E398 series にも： ユーザーマニュアル (31 ページ), データシート (3 ページ), ユーザーマニュアル (29 ページ), トラブルシューティングとデバッグマニュアル (12 ページ)
ページを印刷する
Level 1 and 2 Service Manual
Removing and Replacing the MFT Chamber Assembly and Camera
6809480A37-O
1.
Remove the battery cover, battery, rear housing, and transceiver PC board as
described in the procedures.
2.
Disengage the two plastic MFT Chamber assembly side connectors from the
transceiver PC board and lift up the MFT Chamber assembly as shown in
Figure 15.
3.
Using the disassembly tool, gently pry up the camera flex connector from the
transceiver PC board.
Disassembly Tool
MFT Chamber Assembly
Disassembly Tool
Side Clips
Figure 15. Removing and Replacing the MFT Chamber Assembly
4.
To replace, place the camera flex connector on the transceiver PC board camera
connector and press it into place.
5.
Fold over the MFT Chamber assembly, aligning the camera with the camera
hole in the MFT Chamber and press into place engaging the two plastic side
clips on to the transceiver PC board.
6.
Replace the transceiver PC board, rear housing, battery, and battery cover as
described in the procedures.
April 21, 2004
assembly To
Camera
Disassembly Tool
Camera Flex Connector
Disassembly
Disassembly Tool
Disassembly Tool
29