- ページ 16
コードレス電話 Motorola H104のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola H104 26 ページ。 Dect 6.0
ページを印刷する1. Press MENU.
2. Press VOL+ or REDIAL/VOL- to scroll through the menu.
3. Press MENU to open a sub-menu or validate an option.
Press
/BACK to go back to the previous menu level or cancel an action.
If you do not press any button on the handset for 30 seconds, the display
will automatically return to standby. It will also return to standby when the
handset is placed on the base or charger.
3.14
Intercom
This feature is only available when there are at least two registered
handsets. It allows you to make internal calls, transfer external home calls
from one handset to another and use the conference option.
3.14.1 Calling another handset
1. Press INT and then VOL+ or REDIAL/VOL- to select the handset you
want to call.
2. Press MENU to call the handset. If there are only two handsets
registered, press INT will call the other handset directly.
3. Press
/BACK to hang up.
NOTE
If the handset is not within the valid operation range, this function may not
be available.
During intercom call, you will hear an alert tone if there is an incoming
external call. You need to press
before answering the incoming external call.
16
/BACK to hang up the intercom call
3.14.2 Transferring an external call to another handset
1. During an external home call, press MENU or INT.
- Your caller is put on hold.
2. Press VOL+ or REDIAL/VOL- to select the handset you want to call.
3. Press MENU to call the handset. If there are only two handsets
registered, press INT will call the other handset directly.
4. When the other handset answers by pressing
SPEAKER, press
/BACK to transfer the call. If the other handset
does not answer, press MENU or INT to talk to your caller again.
3.14.3 Three-party conference call
1. During an external home call, press MENU or INT.
- Your caller is put on hold.
2. Press VOL+ or REDIAL/VOL- to select the handset you want to call.
3. Press MENU to call the handset. If there are only two handsets
registered, press INT will call the other handset directly.
4. When the other handset answers the intercom call, press MENU on
the calling handset to set up the conference call.
5. Press
/BACK on any handset to hang up three-party conference
and leave the other handset in external line with the caller.
3.15
Setting the dial mode
The default dialing mode is suitable for your country and network operator.
It is unlikely that you should need to change this setting unless advised to
do so.
1. Press MENU and then VOL+ or REDIAL/VOL- to select
DIAL MODE
2. Press MENU to select
3. Press MENU and VOL+ or REDIAL/VOL- to select
4. Press MENU to save.
/FLASH or
SETUP BS
.
TONE
PULSE
or
Using the phone
/
.
.