- ページ 19
コードレス電話 Motorola H201のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola H201 30 ページ。 Dect 6.0 digital cordless phone; dect 6.0 digital cordless phone with
answering system
Motorola H201 にも： ユーザーマニュアル (31 ページ)
ページを印刷する
3.17.9 Remote access
Remote access allows you to operate your answering machine and listen
to your messages by calling your phone from another phone.
Turn the remote access on/off
1. Press MENU and VOL+ or REDIAL/VOL- to select
2. Press MENU and VOL+ or REDIAL/VOL- to select
3. Press MENU and VOL+ or REDIAL/VOL- to select
4. Press MENU to confirm.
To enter the remote access mode, dial your phone number from another
phone, when you hear the announcement, press TONE/* and then enter
the 4-digit remote security code (default code is 0000).
The correct sequence of the 4 security PIN digits needs to be detected
before entering remote access mode. Random digits detected prior to the
correct 4 digits sequence are ignored, and answering machine recording
continues until the complete PIN is detected. There is no system prompt to
enter the remote access code.
Press the following keys on your handset to perform the following
functions, after entering your remote access mode.
Press...
To...
1
Repeat message
2
Play/Stop message
3
Skip forward to the next message
4
Toggle Answer Off/Announce Only/Announce
and Record modes
7
Listen to the Main Menu (for Full Voice
prompts only)
0
Delete message
Using the phone
3.17.10 Set the security code
This is used to change the remote access PIN if necessary.
1. Press MENU and VOL+ or REDIAL/VOL- to select
2. Press MENU and VOL+ or REDIAL/VOL- to select
ANSWER MACHINE
.
3. Press MENU and enter the 4-digit security code.
REMOTE ACCESS
.
4. Press MENU to save.
ON
OFF
or
.
3.17.11 Using the answering machine through the handset back
You can also operate your answering machine through the 5 handset back
keys.
3.17.11.1 Turn on or off the answer machine
Press ANS ON/OFF to turn the answering system on or off.
3.17.11.2 Play messages
1. Press
sequence they are recorded following by any older messages.
2. During message playback, press the keys below to perform the
following functions:
X
keys
from idle mode. New messages will be played in the
Stop playing messages.
Skip to play the next message.
Press once to replay current message from the
beginning. Press twice to playback the previous
message.
Delete the current message.
ANSWER MACHINE
.
SECURITY CODE
.
19