- ページ 18
ラジオ Motorola cm200 Commercial SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola cm200 Commercial Series 32 ページ。 Mobile two way radio
Motorola cm200 Commercial Series にも： 特徴 (3 ページ)
ページを印刷する
SENDING A CALL
1
Turn your radio on.
2
Select the desired channel.
3
Hold the microphone vertically 1 to 2 inches
(2.5 to 5 cm) from your mouth. Press the PTT
button to talk; release it to listen.
RECEIVING A CALL
1
Turn your radio on.
2
Adjust the radio's volume, if necessary (see
page 15).
3
Select the desired channel.
4
To respond, hold the microphone vertically 1
to 2 inches (2.5 to 5 cm) from your mouth.
Press the PTT button to talk; release it to lis-
ten.
16
English
MONITORING
It is important to monitor traffic before
transmitting to ensure that you do not "talk
over" someone who is already transmitting.
1
A short press of the preprogrammed Monitor
button places the radio in Sticky Permanent
Monitor mode.
•
You hear a high-pitched tone.
A short press of the Monitor button cancels
Sticky Permanent Monitor mode and returns
the radio to normal operation.
3
To place the radio in open squelch mode,
press and hold the preprogrammed Monitor
button until you hear a high-pitched tone.
4
Momentarily press the Monitor button to
return to normal operation.