- ページ 5

ラジオ Motorola GM600のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola GM600 11 ページ。 Remote mount kit
Motorola GM600 にも：サービスマニュアル (28 ページ), インストレーション・マニュアル (10 ページ)

ページを印刷する

Display

The display, showing icon locations, is as follows:

In the IDLE state the display shows the radio's

identity number. On making a call the display will

show the called number followed by the transmit

timer, see Outgoing calls :

Note that status is represented, in the display, by a

bar.

Getting Started

Turning the Radio On/Off

Turn the radio on by pressing the ON/OFF button.

The radio then enters a self test routine. During the

test the display will be activated, the self test tone

will sound, and the green LED will light. If the radio

fails the self test a continuous low tone will sound

and the red or yellow LED will ﬂash. The radio is

turned off by depressing the ON/OFF button for 2

seconds.

Note:

If the radio fails the self test routine, consult your

dealer.

When the self-test is complete the radio displays its

identity number (display radio only).

After this the radio scans for a radio system, with the

green LED ﬂashing and the scanning icon

When a control channel is acquired, the green LED

will go on and the scanning icon will be replaced by

the registered icon

. The display will also show

the radio identity number. This is known as the IDLE

STATE.

The radio must be in this state before you can make

or receive a call (except for emergency calls).

Display/Getting Started

Getting Started

lit.

English