- ページ 6

ラジオ Motorola GM950のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola GM950 9 ページ。 Remote mount kit
Motorola GM950 にも：ユーザーマニュアル (11 ページ), マニュアル (16 ページ), マニュアル (18 ページ), マニュアル (18 ページ), インストレーション・マニュアル (10 ページ)

ページを印刷する

Option Button Functions

The following functions may be applicable to your

radio, activated by one of the function/option

buttons.

Call Buttons - When a Call button (Base Call /

Variable Call) is pressed, a speciﬁed sequence

of tones is transmitted to set up your call.

Repeater Talkaround

the transmit frequency on a channel to be

switched to the same as the channel's receive

frequency. This will allow a radio to

communicate directly with another without the

need to use a repeater.

Call Forward

- This feature allows you to

pass on calls automatically to another radio,

which may be your portable radio when you are

away from your vehicle.

Monitor

- One option button (usually 5) may be

programmed as Monitor. This feature allows the

user to switch between different receiver settings

programmed as Receive, Monitor 1 and Monitor 2.

Scan

- The scan feature will cause the radio

to search through predeﬁned lists of channels

looking for a condition that will cause the radio to

unmute. While searching for unmute conditions,

the radio is in 'active scan' (green LED ﬂashing

and Scan icon on - display models only); having

Option Button Functions

English

- This feature enables

found the required conditions, the radio will 'land'

on the channel ( display models - green LED off,

Scan icon stays on ; non-display models - green

channel LED on ).

Nuisance Channel Delete - When in scan, if the

radio repeatedly 'lands' (stops) on a channel that

is currently of no interest, press this option button

when listening to the 'nuisance channel', to

temporarily remove the channel from the scan

list (until the radio is turned off then on again).

External Alarm enable/disable

external alarm signal, generated by selective

call decode, on/off.

Memory Channel (display models only) - Up to

two option buttons may be programmed as

Memory Channels. To select the channel, press

the option button for a period of less than one

second. Optionally, pressing the button for longer

than one second selects the current channel as

that button's memory channel.

Voice Scrambler

- When the radio is ﬁtted

with an optional speech scrambler module, two

further features may be programmed onto the

option buttons.

– Coded/Clear speech - the scrambler module

may be switched on and off to suit operational

requirements.

- Turns the