- ページ 11
ラジオ Motorola GP360 SeriesのPDF 基本マニュアルをオンラインで閲覧またはダウンロードできます。Motorola GP360 Series 18 ページ。 Professional radio, power distribution and controller
Motorola GP360 Series にも： 仕様書 (2 ページ), 操作説明 (4 ページ), サービス情報 (32 ページ), サービス情報 (30 ページ), サービス情報 (30 ページ)
ページを印刷する
GETTING STARTED
Radio On-Off/Volume Control
To turn the radio on, turn the On-Off/Volume Control
knob clockwise. To turn the radio off, turn the
On-Off/Volume Control knob counterclockwise until
you hear a click.
At power up the radio will display a message
customised by your dealer,:
Radio On
After this text has been displayed, the radio perform
a self test routine. On completion of a successful
self test the radio will display:
Channel Number
This may be a number or an alias and will be the
channel currently selected by the rotary channel
selector. Alternatively, if required the radio may
display a message customised by your dealer. e.g.
Ready
Selecting a Radio Channel
Turn the channel selector rotary knob clockwise or
counterclockwise until you reach the desired
channel indicated on the display.
8
English
Sending a Call
1.
Select the desired channel.
2.
Press the PTT button and speak clearly into the
microphone.
Your mouth should be 2.5 to 5 cm away from
the microphone.
3.
Release the PTT button when you finish
speaking.
Note:The system may have a limited call time and
the call may be terminated automatically if this
call time is exceeded.
Receiving a Call
1.
Turn your radio on and adjust the volume level.
2.
Switch to the desired channel.
3.
If, at any time, a call is received you will hear
the call at the volume level you have set.
Cancelling/Ending a Call
To terminate a call at any time press the Monitor/
Call Cancel button. Always end a call by pressing
the Monitor/Call Cancel button.