- ページ 13

ラジオ Motorola MaxTrac 300のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Motorola MaxTrac 300 37 ページ。 6-frequency conventional fm radio
Motorola MaxTrac 300 にも：操作説明 (2 ページ), ユーザーマニュアル (10 ページ)

ページを印刷する

1. Maxtrac 100™ and Maxtrac 300™ Features

Sending an Identification Number

Every time the PTT key is pressed, the radio automatically transmits a unit

identification (ID) number. While holding the PTT key, a tone may be heard while

the unit ID number is being sent out. Do not begin talking until the tone is over.

Sending an Emergency Alert

To send an emergency alert, press the external footswitch or pushbutton.

If programmed for STANDARD EMERGENCY, the following will occur:

•

The operator will hear a single alert tone when the emergency is sent by the

radio and the transmit (Tx/Bsy) LED will light.

•

The letters "EE" will appear on the display

(MaxTrac 300 radio only).

•

Five alert tones will sound to indicate the

c o n t r o l

u n i t

acknowledged the emergency. The "EE"

will then disappear from the display

(MaxTrac 300 radio only).

•

Messages will be heard over the radio's

speaker during the emergency.

•

Monitor and busy LEDs will function normally during the emergency.

•

The only way to cancel the emergency is by pressing the push-to-talk (PTT).

No other button press will function normally except monitor button.

If programmed for EMERGENCY REVERT, the radio will automatically change

(revert) to an emergency channel to send the call. The channel display will show

the emergency channel after the "EE" clears (MaxTrac 300 radio only).

If programmed for SILENT EMERGENCY, there will be no audio or visual indication

that the emergency call was sent and the radio will remain muted. The operator

must press the PTT button to initiate a voice message.

Display of Incoming Identification Numbers

Whenever an operator in the system presses

the PTT key, the unit identification number (ID)

will be shown on the display for 10 seconds or

less if another incoming ID is received.

h a s

r e c e i v e d

MaxTrac 100/300 Operation (cont.)

Tx/Bsy Mon

a n d

Mon

Tx/Bsy Mon

Mon

MaxTrac 300

Signalling Operation (cont.)

Pri

Usr

Scan

Select

Exit

Select