- ページ 29

ラジオ Motorola MaxTrac 300のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Motorola MaxTrac 300 37 ページ。 6-frequency conventional fm radio
Motorola MaxTrac 300 にも：操作説明 (2 ページ), ユーザーマニュアル (10 ページ)

ページを印刷する

1. Maxtrac 100™ and Maxtrac 300™ Features

(4) Locate the nearest available vehicle chassis-ground mounting point and

shorten the black led to remove excess cable length.

(5) Install ring lugs (supplied) onto the stripped end of the power cable black

lead. Also install a ring lug onto the stripped end of the red lead on the fuse

holder as shown in Figure 2.

(6) Locate the fuse holder as close to the battery as possible and away from any

hot-engine component. Mount the fuse holder using the provided mounting

hole and dress wires as necessary. Connect the fuse holder red-adapter-lead

plug to the mating receptacle on the red lead of the power cable as shown in

Figure 2.

ADAPTER

RED LEAD

FIREWALL

BLACK LEAD

(7) Connect the power cable black lead directly to the vehicle chassis ground.

(8) Connect the power cable red lead from the fuse holder to the positive (+)

battery terminal. Make sure the adapter cable is connected to the main

power cable red lead.

Note: Failure to mount the red lead of the power cable kit directly to the

battery may result in severe alternator-whine interference and cause the

radio to revert to mode one each time the power is turned off.

RED

MOLDED IN-LINE

FUSE HOLDER

MTG. HOLE

ENGINE COMPARTMENT

Figure 2. DC Power Cable Assembly

FUSE

COVER

RED LEAD

RING LUGS

TO BATTERY (+)

TO VEHICLE

CHASSIS GROUND

Begin Installation (cont.)

DC Power Cable Installation (cont.)