- ページ 7

ラジオ Motorola MaxTrac 300のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola MaxTrac 300 10 ページ。 6-frequency conventional fm radio
Motorola MaxTrac 300 にも：取扱説明書 (37 ページ), 操作説明 (2 ページ)

ページを印刷する

On Larry's MaxTrac 300, after programming desired channels, press the [Scan] button.

To turn off the [Scan], Larry just presses the scan button again.

Optional Priority Scanning

Using the [Up] or [Down] buttons, select the

channel you wish to add (or remove) from the user

scan list.

Pressing [Select] will toggle the channel on or off

your scan list.

The display will indicate if a channel is in the user

scan list by showing a vertical segment in the

upper left of the display.

Repeat steps 3 to 5. Once you have your desired

channels selected just press [Scan] and the display

should go back to normal. Now, you can press the

[Scan] button to start scanning. Another thing to

note is the User Scan channels will stay in the

radio until changed. Loss of power won't clear the

list.

The operator can also set Priority One and Priority Two

channels for the User Scan list which will be checked more

often than the other channels in the scan list. During the

procedure above, press and hold [Select] for 2 seconds and

the [Pri] led at the top of the display should blink. This

indicates you've set Priority One as shown in the first