- ページ 6

ラジオ Motorola MCS 2000のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola MCS 2000 20 ページ。
Motorola MCS 2000 にも：インストレーション・マニュアル (14 ページ), レトロフィット説明書 (11 ページ)

ページを印刷する

MCS 2000 Model I

Outgoing Calls

When you have selected zone and mode, you are

ready to transmit.

Lift the microphone out of its holder and press the

transmit key PTT (F) while talking, release it while lis-

tening. Speak in a normal tone of voice, keeping a dis-

tance of 5 -10 cm (2-4") from the microphone. While

transmitting the red indicator (B) will light.

Conventional only:

If the orange indicator is lit, the channel is busy. Wait

for the indicator to turn off before transmitting.

Trunking only:

If the busy tone sounds, release the PTT (F) and wait

for the automatic call back tone. When this tone is

heard, press the PTT (F) within 3 seconds to transmit

the call again.

If your radio is equipped with a time out timer, a warn-

ing tone will sound a few seconds before the call is

terminated.

Scanning

Scan allows the user to monitor more than one chan-

nel or talkgroup (including the selected channel or

talkgroup) at a time for activity.

Channels within a scan list may be assigned priority

levels as follows:

Priority 1: Most important

Priority 2: Second most important

Non-Priority: Normal scan list member without

priority

In scan the radio will listen to the channel/talkgroup

with the highest priority. If a channel/talkgroup with a

higher priority becomes active while the radio is listen-

ing to a lower priority member, the radio will switch to

the higher priority channel/talkgroup.

Note: If the user is involved in a conversation, he

will not be interrupted by any normal priority calls.

Turning Scanning On/Off

The scanning feature may be turned on via the Scan

button (8) or via a menu as previously described.

For as long as "SCAN ON" is selected, the scan icon

( ) will be on in the display and the radio will scan for

activity in the channels/talkgroups that are deﬁned in

the scan lists of the present mode.

Note: If a mode is pre-programmed with auto-

scanning, the radio scans automatically when-

page 6

68P81083C48-B