- ページ 2
ラジオ Motorola SABER NTN4734AのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Motorola SABER NTN4734A 11 ページ。 Handie-talkie portable radios
ページを印刷する
D. Add the following
to the
WARNING:
*
Motorola recommends proper recycling
of
ALL
rechargeable batteries.
7. On page
1,
under 3.
DESCRIPTION,
after nickel-
cadmium
in
the safety instruction
(WARNING
section),
insert,
and nickel-metal hydride (NI-MH).
8. On
page
2,
under 5.
IN
CASE
OF
TROUBLE,
complete the following
changes:
A. Change
the
WARNING
to read:
WARNING
USE
ONLY MOTOROLA
NICKEL-
CADMIUM (NI-CD) OR
NICKEL-METAL
HYDRIDE
(NI-MH)
BATTERIES
WITH
THIS
CHARGER.
B. Before 6.
CIRCUIT DESCRIPTION,
add the
following:
BLINKING
CHARGER
INDICATOR LIGHTS
The battery circuitry has
been designed
to
regulate
the rapid
charge rates
to
provide
optimum performance and maximum
cycle
life.
In
some
cases,
new batteries and batteries that
have
had periods of prolonged
storage
may
require more than a 2-hour rapid-charge
cycle
to
achieve
rated
capacity.
SABER™ (MX1000)
chargers have
a maximum 2-hour rapid-charge
fault
mode and will time-out
if
rapid-rate
charging has
not
been completed
prior to two
hours.
If
this condition
occurs,
the
charger's
red
indicator lights
will
flash. When this happens,
remove the battery
from the
charger, allow the
battery temperature
to
cool, and then re-insert
in
the
charger
to
complete
the
charge cycle. The
period
of time required for the battery to
reach
normal
temperatures should
not
exceed
one
hour.
If
the problem with flashing lights continues
to exist, a fault
has been detected
in
the battery
or charger, indicating repair
or
replacement.
9.
On
pages
2
and 3, under 6.
CIRCUIT
DESCRIPTION,
add the following:
A.
On
page 3, Table
1.
Normal
RC
Values,
and
in
the first box under battery type, add
NTN7014A.
B.
In
Table
2.
Charging Rates,
and
in
the
first box
under battery type, add
NTN7014A.
D. Add the following
to the
WARNING:
*
Motorola recommends proper recycling
of
ALL
rechargeable batteries.
7. On page
1,
under 3.
DESCRIPTION,
after nickel-
cadmium
in
the safety instruction
(WARNING
section),
insert,
and nickel-metal hydride (NI-MH).
8. On
page
2,
under 5.
IN
CASE
OF
TROUBLE,
complete the following
changes:
A. Change
the
WARNING
to read:
WARNING
USE
ONLY MOTOROLA
NICKEL-
CADMIUM (NI-CD) OR
NICKEL-METAL
HYDRIDE
(NI-MH)
BATTERIES
WITH
THIS
CHARGER.
B. Before 6.
CIRCUIT DESCRIPTION,
add the
following:
BLINKING
CHARGER
INDICATOR LIGHTS
The battery circuitry has
been designed
to
regulate
the rapid
charge rates
to
provide
optimum performance and maximum
cycle
life.
In
some
cases,
new batteries and batteries that
have
had periods of prolonged
storage
may
require more than a 2-hour rapid-charge
cycle
to
achieve
rated
capacity.
SABER™ (MX1000)
chargers have
a maximum 2-hour rapid-charge
fault
mode and will time-out
if
rapid-rate
charging has
not
been completed
prior to two
hours.
If
this condition
occurs,
the
charger's
red
indicator lights
will
flash. When this happens,
remove the battery
from the
charger, allow the
battery temperature
to
cool, and then re-insert
in
the
charger
to
complete
the
charge cycle. The
period
of time required for the battery to
reach
normal
temperatures should
not
exceed
one
hour.
If
the problem with flashing lights continues
to exist, a fault
has been detected
in
the battery
or charger, indicating repair
or
replacement.
9.
On
pages
2
and 3, under 6.
CIRCUIT
DESCRIPTION,
add the following:
A.
On
page 3, Table
1.
Normal
RC
Values,
and
in
the first box under battery type, add
NTN7014A.
B.
In
Table
2.
Charging Rates,
and
in
the
first box
under battery type, add
NTN7014A.