- ページ 14

ラジオ Motorola XPR 4350のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Motorola XPR 4350 45 ページ。

1-2

1.2

Standard Configurations

1.2.1

Dash Mount Configuration

In the dash mounting version of the XPR 4300/4350/4500/4550, the control head is mounted on the

front of the transceiver housing. Electrical connection between the two takes place within the radio

via a flexible circuit board between the connectors on the front of the transceiver and at the back of

the control head.

For details on this configuration, see

NOTE:

For details on these configurations, see

1.3

If mobile radio equipment is installed at a fixed location and operated as a control station or as a

fixed unit, the antenna installation must comply with the following requirements in order to ensure

optimal performance and compliance with the RF energy exposure limits in the standards and

guidelines listed in the 68P81095C99 manual:

• The antenna should be mounted outside the building on the roof or a tower if at all possible.

• As with all fixed site antenna installations, it is the responsibility of the licensee to manage the

site in accordance with applicable regulatory requirements and may require additional compli-

ance actions such as site survey measurements, signage, and site access restrictions in order

to ensure that exposure limits are not exceeded.

March 23, 2006

Section 2.2.1 on page

Section 2.2.2 on page

Introduction: Standard Configurations

2-5.

2-8.

6816812H01