- ページ 11

試験装置 AEMC instruments 2127.84のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEMC instruments 2127.84 20 ページ。 Fault mapper pro graphical tdr

ページを印刷する

4.3

The instrument is switched on and off using the green power button

found on the lower right side of the front panel. When the unit is first switched

on it will display the opening screen giving the software version, the currently

selected Vp (Velocity of Propagation), cable impedance and battery status

indicator.

4.4

1. Hold down the

set-up mode.

2. The following options can be configured:

• TDR or Tone Generation

• Set Vp to % (1 to 99%) or speed in micro-seconds (see § 4.8)

• Set cable impedance (Z) to 25, 50, 75 or 100Ω Twisted pair (T/P)

• Set measurement units to Feet or Meters

• Adjust the display contrast

• Disable/Enable Auto-off function

3. Press the

4. Press the

5. Press the

NOTE: When the Fault Mapper Pro

current set-up parameters.

Fault Mapper Pro

Find Quality Products Online at:

All manuals and user guides at all-guides.com

Getting Started

Set-up Mode

button, then press the

TDR /

TDR

Vp % VC

Vp=67%

T/P 100Ω

Meters

Contrast

Shutdown : 1 Minute

button to move the line selector (>) down the screen.

TEST /

and

buttons to change the setting of the line selected.

button again to save changes and exit set-up mode.

TDR /

Model CA7027

GlobalTestSupply

www.

AEMC Instruments

Fault Mapper Pro

VX.X

is turned off, it will retain the

button to enter

TEST /

.com

[email protected]