- ページ 22

ポータブルラジオ Motorola CP160のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola CP160 46 ページ。 Uhf2 (438-470mhz)
Motorola CP160 にも：基本マニュアル (16 ページ), 基本マニュアル (16 ページ), 基本マニュアル (18 ページ), 詳細サービスマニュアル (28 ページ), Cps/チューナー・インストレーション・マニュアル (6 ページ), サービス情報 (46 ページ), サービス情報 (46 ページ)

RECEIVING A CALL

Turn your radio on.

Adjust the radio's volume.

Select the desired channel.

Listen for voice activity. The LED indicator

flashes red while your radio is receiving.

To respond, hold the radio vertically 2.5 to 5

cm (1 to 2 inches) from your mouth. Press the

PTT to talk; release it to listen

Note: The system may have a limited call time and

the call may be terminated automatically if

this call time is exceeded.

English

Turn your radio on.

Select the desired channel.

Monitor for traffic (using the pre-programmed

Monitor button) before transmitting to ensure

that you do not 'talk over' someone who is

already transmitting.

Hold the radio vertically 2.5 to 5 cm

(1 to 2 inches) from your mouth. Press the

PTT to talk; release it to listen.

Note: Your radio may be configured for 'Transmit

Inhibit' under certain conditions (e.g. when

the channel is in use by others) in which

case, the channel busy tone will sound when

you press the PTT or call button to indicate

that transmission is inhibited.